Kenwood KOS-V1000, Instruction Manual

Page: 59 / 92

English 59
4
Selects a navigation system connection.
( RGB)
"RGB": Allows the Kenwood’s Navigation
System to connect via its interface
cable.
"AV-IN": Allows a third-party navigation
system to connect via the AV
INPUT1 port.
"Off": Must be used if no navigation
system is connected. (The
navigation display is cancelled
when the AV source is switched.)
5
Returns to the original screen.
6
7
8
6
Selects an AV source to be output at the AV
OUTPUT port. ( AV-IN1)
7
Sets a method to switch to the rear view
camera video display. ( Off )
"On": Switches to the rear view camera
video display when engaging the
shift knob of car to "Reverse".
"Off": Switches to the the rear view camera
video display when engaging the
shift knob of car to "Reverse" and
then pressing the [V.SEL] switch
several times.
8
You can flip the left and right of the rear
view camera video display. Set to "Reverse"
and the the rear view will be displayed left
and right in mirror image on the screen.
(
Off )
9
10
11
12
9
Selects speakers used for voice guidance of
the navigation system. ( F-Left)
"F-Left": Uses the front left side speaker
for voice guidance.
"F-Right": Uses the front right side speaker
for voice guidance.
"Front All": Uses both front speakers for
voice guidance.
p
Adjusts the volume for voice guidance of
the navigation system. ( 21)
q
Mutes the volume during voice guidance of
the navigation system. ( On)
When turned "On", the volume level drops
for voice guidance.
w
Sets a selecting method of audio source
from the Navigation system.( Off )
"On": Allows you to select the audio
source input from the Navigation
system interface by pressing [SRC] or
selecting it on Source Select screen.
"Off": The audio source cannot be selected
using [SRC] or on Source Select
screen.
B64-3585-00̲00̲En̲p56-p92.indd 59 B64-3585-00̲00̲En̲p56-p92.indd 59 07.3.9 1:42:29 PM 07.3.9 1:42:29 PM