16
KNA-DV
2200
3-2. Vehicle Signal
By touching the “ Vehicle Signal”, the vehicle and gyro sig-
nals can be confirmed.
PARTS INFORMATION
Cancel
Nav Information
FORMAT VERSION KIWI _ _ - _ _ - _ _
Disc Information
DATA VERSION _ _ - _ _ _ _ _
KENWOOD
NAV SOFT
LOADING SOFT
: _ _ _ _
: _ _ _ _
NAVI RGB CHECK
Cancel
Need to confirm if the set color matches
the display color
Black
Red
Green
Blue
White
VEHICLE SIGNAL
Cancel
Gyro
Voltage
Relative bearing
: _ _ _ _ mV
: _ _ _ _ degrees
ACC
REV
SPD
: On
: Off
_ Pulses
_ MPH
_ km/h
PKB
ILL
: Off
: On
• Vehicle Section
(1) ACC: On/Off.
(2) PKB: Turned on when the parking brake is put on.
(3) REV: Turned on when the gear is in Reverse.
(4) ILL: Turned on when the small lamp is turned on.
(5) Number of SPD pulses: Indicated the number of vehicle
speed pulses.
Speed: Speed is indicated in two ways.
• Gyro Section
The following values in (1) and (2) below are changed when
the ECU is rotated.
(1) Voltage: Displays the current gyro voltage.
(2) Relative direction: Displays the current relative direction.
3-3. Parts Information
By touching the “ Parts Information”, current NAVI and Disc
information can be confirmed.
• NAVI Information
Current navigation software and ROM used can be confirmed.
• Disc Information
Current format and data versions can be confirmed.
3-4. NAVI RGB Check
By touching the “NABI RGB Check”, RGB condition of moni-
tor can be confirmed.
Whether set color matches the display color or not can be
confirmed.
3-5. Cancellation
By touching “Cancel”, the monitor screen goes back to the
previous screen.
4. Caution
In the test mode of this equipment, there is no item for SRAM
clear (initialization of SRAM).
TEST MODE
