Kenwood KNA-DV2200 Instruction Manual Download | Manualshive

Page: 49 / 52

background image

47

ENGLISH

Accuracy of the Route Guidance

The conditions listed below do not indicate a malfunction.

(1 ) If the vehicle proceeds to the destination without passing through the transit point, a

route to return to the transit point could appear on the screen if a search is repeated.

(2) The guidance might prompt the driver to drive straight even though the vehicle is

being driven on a straight road.

(3) The directional guidance could display multiple place names.
(4) If the vehicle makes a turn at an intersection before the guided route, the wrong type

of voice guidance could be output.

(5) The guidance might not be output whilst the vehicle is making a turn at an

intersection.

(6) The system might not be able to search for the proper route.
(7) If there is no road to the destination or if there is only a narrow road, the route might

only indicate up to an area that is away from the destination.

(8) The repeat search time could be long whilst the vehicle is being driven at high

speeds.

(9) Whilst the system is searching again for the route, the route indication might not

appear in time for the next right or left turn.

(10)  Whilst searching again for the route, the route could make a larger turn.
(11)  The route might not change even if a search is made again.
(12)  The system might guide the driver to make a U-turn.
(13)  The system might guide the driver on a road that cannot actually be travelled (such

as on a road in which entry is prohibited).

(14) The system might not output a guidance even if the vehicle is driven in reverse on

the guided route.

(15) The system might not use a ferry boat even if it is located nearby.
(16) If the guided intersection is near the end of the route search, the system might not

be able to provide guidance.

(17) The route might not go on a toll road even the toll-road priority is selected.

Similarly, a route that uses a toll road could appear on the screen even if the toll-
road priority is not selected. (The driver may or may not select the “toll-road
priority” if both toll and free roads are available.)

KNA-DV2200_(E)_ENG_MMC 03.4.8 0:59 PM Page 47

«
...
47
48
49
50
51
...
»

Summary of Contents for KNA-DV2200





















































Reviews:

No comments

Related manuals for KNA-DV2200

Icebox Flipscreen

Brand: Beyond Pages: 75

Brand: Rexing Pages: 18

Brand: Sune Technology Pages: 13

Brand: Pierce Pages: 76

Brand: Hifonics Pages: 68

Brand: Blitz Pages: 33

Brand: Viking Pages: 5

Brand: Viking Pages: 7

Brand: Naxa Pages: 14

Brand: NavRoad Pages: 66

NAX970HD NAX970HD NAX970HD

Brand: Clarion Pages: 73

Brand: Clarion Pages: 158

Brand: Pyle Pages: 12

Brand: Parkes Dynamic Retrofits Pages: 17

Brand: V7 Pages: 86

Brand: MAC Audio Pages: 20

Brand: Galcon Pages: 8

Brand: SAFEMATIC Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands