6
Direct Access Tuning (using RC-406)
1
Press
*
AM–
/
#FM+
to select a band.
2
Press
DIRECT
to enter Direct Access Tuning.
“– – – • –” (for FM), “– – – –” (for MW/ SW1) or “– – – – –” (for SW2) appears on the display.
3
Press the number buttons to enter a frequency.
4
Press
ENT
38
to search for a frequency.
• To cancel, press
.
• If no operation is done for 10 seconds after step
3
, Direct Access Tuning is automatically canceled.
Other settings
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select
[SETTINGS]
, then press the knob.
3
Turn the volume knob to make a selection (see the following table), then press the knob.
4
Press and hold
to exit.
Default:
XX
LOCAL SEEK
ON:
Searches only MW/ SW1/ SW2 stations with good reception. ;
OFF:
Cancels.
SEEK MODE
Selects the tuning method for the
4
/
¢
buttons.
AUTO1
: Automatically searches for a station. ;
AUTO2
: Searches for a preset station. ;
MANUAL
: Manually search for a station.
AUTO MEMORY
YES
: Automatically starts memorizing 6 stations with good reception. ;
NO
: Cancels. (Selectable only
if
[NORM]
is selected for
[PRESET
TYPE]
.)
(
➜
5)
MONO SET
ON
: Improves the FM reception, but the stereo effect may be lost. ;
OFF
: Cancels.
USB / iPod
RADIO
Start playback
USB
The source changes to USB and playback starts.
iPod/iPhone
(for
KMM-U256
)
The source changes to iPod and playback
starts (depending on the status of the
connected device).
Press
5
iPod
to select the control mode
while in iPod source.
MODE ON:
From the iPod*
1
. ;
MODE OFF:
From
the unit.
*
1
You can still control play/pause, file
selection, fast-forward or reverse files
from the unit.
USB input terminal
USB input terminal
CA-U1EX (max.: 500 mA)
(optional accessory)
KCA-iP102 (optional accessory)
Muting upon the reception of a phone call
Connect the MUTE wire to your telephone using
a commercial telephone accessory.
(
➜
15)
When a call comes in, “CALL” appears.
• The audio system pauses.
• To continue listening to the audio system
during a call, press
SRC
. “CALL” disappears
and the audio system resumes.
When the call ends, “CALL” disappears.
• The audio system resumes.
EN_KMM-U256[MN]1.indd 6
EN_KMM-U256[MN]1.indd 6
11/21/12 5:10:26 PM
11/21/12 5:10:26 PM
