5
ENGLISH |
GETTING STARTED
Default:
XX
PRESET TYPE
NORM
: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ SW1/
SW2). ;
MIX
: Memorizes one station for each preset button regardless of the selected band.
KEY BEEP
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
TDF ALARM
ON:
Activates the alarm if you forgot to detach the faceplate when ACC is set to OFF. ;
OFF:
Deactivates.
BUILTIN AUX
ON
: Enables AUX in source selection. ;
OFF
: Disables.
(
➜
8)
SWITCH PRE
REAR
/
SUB-W
: Selects whether rear speakers or a subwoofer are connected to the line out
terminals on the rear (through an external amplifier).
SP SELECT
OFF
/
5/4
/
6 × 9/6
/
OEM
: Selects according to the speaker size (5 inches or 4 inches, 6×9 inches
or 6 inches) or OEM speakers for optimum performance.
F/W UPDATE
F/W UP xx.xx
YES
: Starts upgrading the firmware. ;
NO
: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
RADIO
Search for a station
1
Press
L
SRC
to select TUNER.
2
Press
repeatedly (or press
*
AM–
/
#FM+
on RC-406) to select FM1/ FM2/ FM3/ MW/ SW1/
SW2.
3
Press
4
/
¢
(or press
4
/
¢
(
+
) on RC-406) to search for a station.
•
To store a station:
Press and hold one of the number buttons (
1
to
6
).
•
To select a stored station:
Press one of the number buttons (
1
to
6
) (or press one of the
number buttons (
1
to
6
) on RC-406).
Change the frequency steps
You can change the frequency step from 50 kHz to 200 kHz for FM and 9 kHz to 10 kHz for MW.
1
Press and hold
L
SRC
to turn off the power.
2
While pressing number buttons
1
and
5 iPod
(or
5
), press
L
SRC
.
Release your fingers from the buttons after the display appears.
• To restore the initial setting, repeat the same procedure.
• When the frequency step is changed, the previously stored stations in the memory are deleted.
EN_KMM-U256[MN]1.indd 5
EN_KMM-U256[MN]1.indd 5
11/21/12 5:23:47 PM
11/21/12 5:23:47 PM
