20
adjusting the rinse aid setting
If dishes are not drying properly or are spotted, adjust the
dial to the next highest number until your dishes are spot-free.
The rinse aid reservoir has six settings. The recommended
setting is “3.”
1. Turn the cap anticlockwise and remove.
2. Using a coin or screwdriver turn the dial to adjust the setting.
3. Replace the cap and turn clockwise to close.
adding rinse aid
Rinse aid helps to ensure that washed crockery dries quickly and is free of marks. Only use rinse
aid that is made for domestic dishwashers. This model is designed to use liquid rinse aids only.
The correct amount needed will be dispensed automatically.
Please follow the steps below to fill the rinse aid reservoir.
1. Turn the cap anticlockwise until the cap
open marking is aligned and lift the cap out.
2. Pour in the rinse aid until the level
indicator turns completely black in colour.
Be careful not to overfill the reservoir.
Wipe up any spills.
3. Replace the cap and turn clockwise to close.
• The rinse aid warning light will illuminate when the reservoir need refilling.
• Alternatively, you can check the rinse aid indicator window next to the reservoir’s cap.
When it is black, it is full, when it is clear, it means it is almost empty.
• If the water in your area is soft, you may not
need rinse aid as it may cause white film to
develop on your dishes.
* All images are for reference only; please refer to your individual unit for actual item.
If you decide to use a detergent tablet,
you may not need to add rinse aid into the
rinse aid reservoir.
open
rinse aid indicator
close
KID60S17_IB.indd 20
30/05/2017 12:41
