Kenwood KDW60S12, Installation Instructions Manual

Page: 9 / 36

9
installation
unit in mm
level
level
level
level
600
580
850
30
850
600
620
min.100
80
600
580
850
30
850
600
620
min.100
80
ON
OFF
ON
OFF
1. Please ensure the dishwasher is installed
by a qualified technician. Refer to the tools
required.
ON
OFF
location
When selecting a position for your
freestanding dishwasher you should make
sure the installation surface is flat and
firm, and the room is well ventilated. Avoid
locating your dishwasher near a heat source,
eg. cooker, boiler or radiator. Extreme cold
ambient temperatures may also cause the
appliance not to perform properly. This
dishwasher is not designed for use in a garage
or outdoor installation.
Do not drape the dishwasher with any
covering. When installing, ensure that free
space is left at the sides.
2. Ensure there is sufficient clearance
on each side of the unit to allow slight
sideways movement for servicing when
required. Good levelling is essential for
correct closure and sealing of the door.
When the unit is correctly levelled, the door
should not catch the inner liner on either
side of the cabinet. The adjustable feet
may be loosened or tightened in order to
obtain the optimum levelling of the unit.
If required, the worktop of the dishwasher
can be removed. The height without
the worktop is 820 mm, the minimum
dimensions required to accommodate the
dishwasher within fitted kitchen furniture
units.
installation
All parts removed must be saved to do
the reinstallation in the future. Ensure
the dishwasher is unplugged and empty.
We recommend that 2 people handle the
dishwasher during installation.