10
|
KDV-MP5343U/ KDV-MP5443U/ KDV-MP4343/ KDV-MP4443
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set during DVD source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AV IN or AUX source.
: Can be set for sources other than the standby
source by setting “2ZON” of <Audio Setup> (page
25) to “ON”.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
*Factory setting
*
1
Function of KDV-MP5343U/ KDV-MP5443U
Function Control/ Setup Menu
Function Control
Functions in the table below can be set up by using Function Control.
1
Enter Function Control mode
Press the [
] button for at least 1 second.
“FUNCTION” is displayed.
2
Select your desired setup item
Operation type
Operation
Movement between items
Turn the [AUD] knob.
Selection of item
Press the [AUD] knob.
Return to previous item
Press the [
] button.
Repeat selection and determination until your
desired setup item is selected.
In this manual, the above selection is indicated as
Press [
]
1sec.
, and select “MENU”
>
“ICON”.
Category
Function of setup item
Condition
“iPodCTRL”*
1
Allows you to set up iPod Control by Hand
Mode.
“DSP”
Allows you to set up the sound environment.
“MENU”
Allows you to set up the environment.
—
“RETURN”
Exit Function Control mode.
—
3
Make a setting
Press the [AUD] knob or turn the [AUD] knob to
select a setting value, and then press the [AUD]
knob.
• The value of items with [AUD] mark can be set by
pressing the [AUD] knob.
• The value of items with [
4
/
¢
] mark can be
set by pressing the [
4
] or [
¢
] button.
• Some items require you to keep pressing the
[AUD] knob for 1 or 2 seconds to set. For these
items, the time during which you need to keep
pressing the [AUD] knob is displayed in the Entry
column in seconds.
4
Exit Function Control mode
Press the [
] button for at least 1 second.
“MENU”
Item
Setting
Entry
Setting overview
Condition Page
“CODE SET”/
“CODE CLR”
1 sec.
Sets/Resets security code.
24
“DIM”
“OFF”*/ “ON”
4
/
¢
Adjusts the brightness of the display according to the
surrounding illumination.
—
—
“ICON”
“OFF”/ “ON1”/
“ON2”*
4
/
¢
Sets the Graphics mode of the display.
32
“SWPRE”
“R”*/ “SW”/ “AV”
4
/
¢
Sets the preout output.
32
B64-4430-00̲00̲M̲English.indd 10
B64-4430-00̲00̲M̲English.indd 10
09.2.13 10:19:08 AM
09.2.13 10:19:08 AM
