12
* All images are for indication only; please refer to your individual unit for actual item.
If the Flame Is Irregular
If the flame is yellow or irregular, check that the burner parts, including the burner cap, are:
• Clean and dry.
• Positioned correctly. See ‘Replacing the Burners’.
• Also see 'Hints and Tips'.
Using the Hob
The control has 3 positions: 0, maximum ( ) and minimum ( ). After you have ignited the burner at the
maximum position ( ), you should adjust the flame length for cooking between the maximum ( ) and
minimum ( ) flame positions. You must not cook with the control between the maximum ( ) and 0 positions.
Flame failure probe
Ignitor
If the Burner Does Not Light
If the burner does not light, check that:
• The cooker is switched on at the mains supply to enable the ignition circuit to work.
• The gas is turned on.
• You have held in the control for at least 5 to 10 seconds.
• The ignitors are sparking. If the ignitors are not sparking, they may be dirty or wet. Clean them gently
with a small nylon brush such as a toothbrush as shown below.
Never operate the ignition without the burner parts in position. You may damage the electric ignition.
* All images are for indication only; please refer to your individual unit for actual item.
Kenwood Free Standing Dual Fuel Double Oven KDGC66S19 Manual.indd 12
27/01/2020 11:12
