Kenwood KDC-X790 Service Manual Download Page 4

Page: 4 / 62

KDC-W8534/W8534Y
KDC-X790

COMPONENTS DESCRIPTION

Ref. No.

Application / Function

Operation / Condition / Compatibility

Q41,43,44

Illumination AVR

When Q43’ 2pin goes Hi, Ill AVR outputs 10.5V.

Q50~52

SW16V (Surge Protection)

When Q51’ 2pin goes Hi, SW16V outputs 13V.

Q60

VFD (4.7V) AVR SW

When base goes Hi, VFD AVR off.

Q61

Switching Regulator frequency control SW (IC60)

Q62

Mecha digital AVR SW

When base goes Hi, Mecha digital AVR off.

∗

DXM-680x : 4V, Other : 5V

Q63

VFD (4.7V) AVR Switching Power Driver

This FET is governed by IC60.

Frequency is decided at Q61.

Q64

Mecha digital AVR Power Driver

This FET is governed by IC60.

Frequency is fixed 400kHz.

Q80,81

VFD (57V) AVR SW

When Q81’ base goes Hi, VFD (57V) AVR outputs 57V.

Q91

Panel5V Discharge SW

When Q91’ base goes Hi, Panel5V is discharged.

Q100,101

Panel Detect SW

When Q100’ base goes Lo, panel is detected.

Q200,201

Pre-out mute driver

When a base gose Lo, mute driver is turned on.

Q202

Acc Detect SW

When Q202’ base gose Hi, Acc voltage is detected.

Q204

Surge Detect SW

When Q204’ base goes Hi, IC750 is changed into a standby state.

Q205

B.U Detected SW

When Q35’ base gose Hi, B.U voltage is detected.

Q206

Ext Amp Control Buffer

It is buffer for IC102 output.

Q207

Small-lamp Detect SW

When Q207’ base goes Hi, Small-lamp is detected.

Q208,209

Power Antenna SW

When Q206’ base goes Hi, power antenna switch outputs 14V.

Q300

DSP mute SW

When base goes Lo, DSP is set to mute.

Q402,403

AM+B SW

When Q403’ base gose Hi, AM+B is outputs.

DSI lights when the base is “L”.

Q450

DSI Driver

DSI turns off when the base is “H”.

DSI turns on and off when panel is taken off.

Q600~602

Pre-Amp +9V AVR

Q600 and 602 works as a differential amplifier,

Q601 works as a driver and +9.4V is supplied to OP Amp for Pre-out.

Q603~605

Pre-Amp -9V AVR

Q603 and 605 works as a differential amplifier,

Q604 works as a driver and -9.1V is supplied to OP Amp for Pre-out.

Q606,607

AUDIO 10.5V AVR

When Q606’ base goes Hi, AVR outputs 10.5V.

Q608~613

Pre-out mute SW

When a base gose Hi, Pre-out is set to mute.

Q800,802

REF+B AVR

When Q800’ base goes Hi, AVR outputs 13V.

Q801

SVR6.8V Ref Supply AGC Controller

When the voltage of B.U voltage falls, a return is hung and an output

is reduced.

1pin

2pin

400kHz

600kHz

650kHz

850kHz

Summary of Contents for KDC-X790































































Search results

Summary of Contents for KDC-X790

Reviews:

Related manuals for KDC-X790

Brands by name

Popular brands

Kenwood KDC-X790, Service Manual

Search results

Summary of Contents for KDC-X790

Reviews:

Related manuals for KDC-X790

Brands by name

Popular brands