8
|
KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL
Function Control
Category
Item
Setting
Entry
Setting overview
Condition Page
“SP Select”
**
“Front”*/
“F-R”/ “F-L”
Specify the voice output speaker.
*
“Call Beep”
**
“ON”*/ “OFF”
Output a beep from the speaker when a call comes in.
*
“BT F/W Update”
**
—
1 sec.
Display the firmware version and update the firmware.
34
“Beep”
“OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/
OFF.
—
“Clock Adjust”
—
1 sec.
Sets the clock.
—
22
“Date Adjust”
—
1 sec.
Sets the date.
22
“Date Mode”
7 types
1 sec.
Sets the date display mode.
22
“DSI”
“OFF”/ “ON”*
DSI (Disabled System Indicator) of the unit blinks when
the faceplate is removed.
—
“Illumi DIM”
“OFF”/ “Auto”*
/ “MNAL1” /
“MNAL2”
Sets whether the illumination is dimmed in conjunction
with the light switch of the vehicle or it is dimmed
constantly.
*
“ILM Effect”
“OFF”/ “ON”*
Sets whether the key illumination brightness is
changed in conjunction with the key operation.
—
“ILM MSC SYNC”
“OFF”*/ “ON”
Sets whether the key illumination color is changed in
conjunction with the sound volume.
—
—
“Display”
“OFF”/ “ON”*
Turns off the display when no operation is performed.
—
*
“DISP DIM “
“OFF”/ “Auto”*
/ “MNAL1” /
“MNAL2”
Dims the display part in conjunction with the light
switch of the vehicle.
*
Contrast
“1” - “10”
Adjusting the display contrast.
—
DISP N/P
“POSI 1”/ “2”
/ “NEGA 1”/ “2”
Switches the panel display between positive or
negative.
*
“AMP”
“OFF”/ “ON”*
Turns on/off the built-in amplifier.
*
“Zone2”
“Rear”*/ “Front”
Specifies the destination of AUX input sound when the
Dual Zone function is turned on.
*
“AMP Control”
—
Controls the connected LX amplifier.
—
22
“CRSC”
“OFF”/ “ON”*
Switches to Monaural to decrease noise when
reception is poor.
—
“Name Set”
1 sec.
Sets the display when switched to AUX source.
11
“Language”
**
“English”*/
“Arabic”/
“Persian”/
“Thai”
Selects the language for using on the display.
*
“Chinese”
**
“OFF”*/ “ON”
Selects Chinese as the display language.
*
“Scroll”
“Auto”*/
“Manual”
Specifies whether the text is scrolled automatically.
—
—
“Favorite Delete”
—
1 sec.
Deletes Favorite Preset Memory.
30
“Built in AUX”
“OFF”*/ “ON”
Sets whether to display AUX during source selection.
—
“CD Read”
“1”*/ “2”
Sets the CD read mode.
*
“DEMO Mode”
“OFF”/ “ON”*
2 sec.
Specifies whether to enable demonstration.
—
23
“SETUP”
“Display
Select”
“Type Select”
“DISP TYPE
[A] – [D]”
Sets the display pattern.
—
10
“Graphic Select” “Graphic 1 –2”
Sets the Type C spectrum analyzer display.
—
—
“Side Select”
3 types
Sets the Type A side display.
—
—
B64-4418-00_00_en.indd 8
09.1.13 10:34:17 AM
