ENGLISH
25
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
P. CONT
ANT CONT
MUTE
Wiring connection
When connecting to an external amplifier,
connect its ground wire to the car’s chassis to
avoid damaging the unit.
If your car does not have an ISO terminal :
We recommend installing the unit with a
commercially available custom wiring harness
specific for your car and leave this job to
professionals for your safety. Consult your car
audio dealer.
Fuse (10 A)
Rear/ Front/ Subwoofer output
For 3-way crossover: Tweeter/ Mid Range/ Woofer output
Antenna terminal
Light blue/yellow
(Steering remote control
wire)
To the steering wheel remote control
adapter
Blue/White
(Power control wire/
Antenna control wire)
Brown
(Mute control wire)
To the power control terminal when
using the optional power amplifier or
to the antenna control terminal in the
vehicle
To connect the Kenwood navigation
system, refer your navigations manual
Yellow (A4)
Red (Ignition wire)
Red (A7)
Yellow (Battery wire)
Pin
Color and function
A4
Yellow
:
Battery
A5
Blue/White
:
Power control
A7
Red
:
Ignition (ACC)
A8
Black
:
Earth (ground) connection
B1
Purple
]
:
Rear speaker (right)
For 3-way crossover: Tweeter (right)
B2
Purple/black
[
B3
Gray
]
:
Front speaker (right)
For 3-way crossover: Mid range speaker (right)
B4
Gray/black
[
B5
White
]
:
Front speaker (left)
For 3-way crossover: Mid range speaker (left)
B6
White/black
[
B7
Green
]
:
Rear speaker (left)
For 3-way crossover: Tweeter (left)
B8
Green/black
[
ISO connectors
Connecting the ISO connectors on some VW/Audi or Opel
(Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring harness as
illustrated below.
Unit
Vehicle
A7 (Red)
Ignition wire (Red)
A4 (Yellow)
Default wiring
Battery wire (Yellow)
If no connections are made, do not let the wire come out from the tab.
Microphone input
jack
(
9
)
JS_KWD_KDC_X5000BT_EW_EN_7.indd 25
JS_KWD_KDC_X5000BT_EW_EN_7.indd 25
30/9/2015 11:02:44 AM
30/9/2015 11:02:44 AM
