8
|
English
General features
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time you press the button, the Attenuator
turns ON and OFF.
When the Attenuator is ON, the "ATT" indicator
blinks.
Audio Control
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Basic Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Basic Audio item
Turn the [VOL] knob.
Adjustment Item
Display
Range
Subwoofer level
"SW L"
–15 — +15
System Q
"USER"/"ROCK"/"POPS"/
"EASY"/"TOP40"/"JAZZ"/
"NATURAL"
User/Rock/Pops/
Easy/Top 40/Jazz/
Natural
Bass level*
"BAS L"
–8 — +8
Middle level*
"MID L"
–8 — +8
Treble level*
"TRE L"
–8 — +8
Balance
"BAL"
Left 15 — Right 15
Fader
"FAD"
Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
* Source tone memory: Puts the set up value in the
memory per source.
⁄
About System Q
• You can recall the best preset sound setting for different
types of music.
• Change each setting value with the <Speaker Setting>
(page 9). First, select the speaker type with the Speaker
setting.
• "USER": The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
5
Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob and [ATT]
button.
Audio Setup
Setting the Sound system, such as Cross over
Network.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Setup the Audio item
Turn the [VOL] knob.
Adjustment Item
Display
Range
Front High Pass Filter
"HPF"
Through/40/60/80/100/120/
150/180/220 Hz
Rear High Pass Filter
"HPR"
Through/40/60/80/100/120/
150/180/220 Hz
Low Pass Filter
"LPF"
50/60/80/100/120/Through Hz
Subwoofer Phase
"PHAS"
Reverse (180°)/ Normal (0°)
Volume offset
"V-OFF"
–8 — ±0 (AUX: -8— +8)
Loudness
"LOUD"
OFF/ON
⁄
• Volume offset: Sets each source’s volume as a difference
from the basic volume.
• Loudness: Compensates for low and high tones
during low volume. (Only the low tone is
compensated for when the tuner is selected
as a source.)
5
Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.
B64-3620-00̲00̲English.indd 8
B64-3620-00̲00̲English.indd 8
06.12.19 11:31:39 AM
06.12.19 11:31:39 AM
