English
|
33
Connecting Wires to Terminals
MUTE
P.CONT
ANT.CONT
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
REMO.CONT
AUX IN
Battery wire (Yellow)
Ignition wire (Red)
FM/AM antenna input
Antenna Cord (ISO)
Antenna Conversion Adaptor (ISO–JASO)
(Accessory
3
)
To connect the Kenwood navigation system, consult
your navigation manual.
Wiring harness
(Accessory
1
)
If no connections are made, do not
let the wire come out from the tab.
Power control/Motor antenna
control wire (Blue/White)
TEL mute wire (Brown)
Connect either to the power control terminal
when using the optional power amplifier, or to the
antenna control terminal in the vehicle.
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
See next page
Steering remote control (Light Blue/
Yellow) (KDC-W6537U only)
To Kenwood disc changer/
External optional accessory
To connect these leads, refer to the relevant
instruction manuals.
Rear left output /Sub Woofer left output (White)
Rear right output /Sub Woofer right output (Red)
Do not remove the cap when you do not use the USB
cable. The connector will cause the unit to malfunction
if it gets in touch with any metallic part of the vehicle.
USB connector (1m)
To USB device
Fuse (10A)
Front left output (White)
Front right output (Red)
AUX input (Stereo)
Use the mini-plug which is stereo type
and does not have any resistance.
B64-3620-00̲00̲English.indd 33
B64-3620-00̲00̲English.indd 33
06.12.19 11:31:50 AM
06.12.19 11:31:50 AM
