12
KDC-W6531/W6531Y
/X589/X7529
ter this, any of the item can be selected)
* Normally, Sub Woofer Level is not included. In this ver-
sion, however, the Sub Woofer Level is included, and this
has been already arranged.
• With the remote controller, continuous forwarding is prohib-
ited.
• Using the VOL knob, the Fader is to be adjusted to the fol-
lowing three levels : R15
↔
0
↔
F15. (The default value : 0)
• Using the VOL knob, the Balance is to be adjusted to the
following three levels : L15
↔
0
↔
R15. (The default value :
0)
• Using the VOL knob, the Sub Woofer Level is to be adjusted
to the following three levels : -15
↔
0
↔
+15 . (The default
value : 0)
• Using the VOL knob, Bass / Middle / Treble Level is to be
adjusted to the following three levels : -8
↔
0
↔
+8 . (The
default value : 0)
• Using the VOL knob, the HPF Front / Rear is to be adjusted
to the following two levels : Through
↔
180Hz (or 220Hz).
(The default value : Through)
• Using the VOL knob, the LPF Sub Woofer is to be adjusted
to the following two levels : 60Hz (or 50Hz)
↔
Through. (The
default value : Through)
• Using the VOL knob, the Sub Woofer Phase is to be ad-
justed to the following two levels : Reverse
↔
Normal . (The
default value : Normal)
• Using the VOL knob, the Volume Offset is to be adjusted to
the following two levels : -8
↔
0. (The default value : 0)
• Using the VOL knob, the Loudness ON / OFF is to be ad-
justed to the following two levels : OFF
↔
ON. (The default
value : OFF)
• Using the VOL knob, the 2 Zone ON / OFF is to be adjusted
to the following two levels : OFF
↔
ON. (The default value :
OFF)
• Items of Bass f / Bass Q / Bass EXT / Middle f / Middle Q /
Treble f are not included in the audio adjustment.
●
MENU Items
• By short-pressing [Q] key, MENU can be entered.
• The [DNPP/SBF] and [DIRECT] keys on the remote con-
troller can also be used to enter the MENU.
• With the remote controller, continuous forwarding is prohib-
ited.
• When a CD is used as a source, the default item will be the
F/W Version. (DXM-6800 mechanism installed models.)
* DXM-6800 : X92-5100-00
●
2-ZONE Items
• When using sources other than the STANDBY source, us-
ing a short-press on [AUTO] / [TI] key, 2-ZONE ON / OFF is
achieved.
(Since built-in AUX function is not available with KDC-X589
/ KDC-X7529, this is effective only when CA-C1AX is con-
nected.)
●
Backup Current Measurement
When reset in Acc OFF (Back Up ON) condition, MUTE termi-
nal goes off after 2 seconds, instead of 15 seconds. (During
this time, the CD mechanism does not function.)
●
OPEL Communication Items
During the test mode, OPEL communication line outputs the
following.
(At every 500msec, the output condition of the communica-
tion line will be switched.)
●
Special display when all lights are on
When all lights are on with the STANDBY source, the follow-
ing displays are made when the keys shown below are pressed.
[1] Key
Version display
(Display) 413K-1.02 [“Development Name” -
“Version”]
[2] Key
Serial number display (8 digits)
(Display) xxxxxxxx
[3] Key
Short-press : Power ON hours is displayed.
During Power On hours display, by long-pressing
for 2 seconds, the Power ON hours is cleared.
(Display) PON xxxxx
MAX 65535 (Hours)
[4] Key
Short-press : CD operation hours is displayed.
During CD operation hours display,
by long-pressing for 2 seconds, CD operation
hours is cleared.
(Display) CDT xxxxx
MAX 65535 (Hours)
TEST MODE
CE
DATA
CLK
500msec
500msec
500msec
