5
ENGLISH |
RADIO
Search for a station
1
Press
L
SRC
to select TUNER.
2
Press
repeatedly (or press
*
AM–
/
#FM+
on RC-406) to select FM1/
FM2/ FM3/ MW/ SW1/ SW2.
3
Press
4
/
¢
(or press
4
/
¢
(+)
on RC-406) to search for a station.
•
To store a station:
Press and hold one of the number buttons (
1
to
6
).
•
To select a stored station:
Press one of the number buttons (
1
to
6
) (or
press one of the number buttons (
1
to
6
) on RC-406).
Change the frequency steps
You can change the frequency step from 50 kHz to 200 kHz for FM and 9 kHz to
10 kHz for MW.
1
Press and hold
L
SRC
to turn off the power.
2
While pressing number buttons
1
and
5
, press
L
SRC
.
Release your fingers from the buttons after the display appears.
• To restore the initial setting, repeat the same procedure.
• When the frequency step is changed, the previously stored stations in the
memory are deleted.
Direct Access Tuning (using RC-406)
1
Press
*
AM–
/
#FM+
to select a band.
2
Press
DIRECT
to enter Direct Access Tuning.
“– – – • –” (for FM), “– – – –” (for MW/ SW1) or “– – – – –” (for SW2) appears on the
display.
3
Press the number buttons to enter a frequency.
4
Press
4
/
¢
(
+
) to search for a frequency.
• To cancel, press
.
• If no operation is done for 10 seconds after step
3
, Direct Access Tuning is
automatically canceled.
Other settings
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select
[SETTINGS]
, then press the knob.
3
Turn the volume knob to make a selection (see the following table), then press
the knob.
4
Press and hold
to exit.
Default:
XX
LOCAL SEEK
ON
: Searches only MW/ SW1/ SW2 stations with good reception. ;
OFF
: Cancels.
SEEK MODE
Selects the tuning method for the
4
/
¢
buttons.
AUTO1
: Automatically searches for a station. ;
AUTO2
: Searches for a preset station. ;
MANUAL
: Manually search for a station.
AUTO
MEMORY
YES
: Automatically starts memorizing 6 stations with good reception. ;
NO
: Cancels.
(Selectable only if
[NORMAL]
is selected for
[PRESET
TYPE]
.)
(
➜
4)
MONO SET
Selectable only when the source is FM.
ON
: Improves the FM reception, but the stereo effect may be lost. ;
OFF
: Cancels.
EN_KDC-U556BT[M]_3.indd 5
EN_KDC-U556BT[M]_3.indd 5
10/19/12 4:19:03 PM
10/19/12 4:19:03 PM
