34
English
ANT. CONT
MUTE
P.CONT
STEERING WHEEL
REMOTE INPUT
REMOTE CONT
–
+
L
R
Antenna Cord
FM/AM antenna
input (JASO)
DAB antenna input
(SMB) (“DAB ANT
POWER” page 9)
USB connector
AUX input (Stereo)
Use the mini-plug (3.5 mm ø) cable which
is stereo type and does not have any
resistance.
Rear output/ Sub
Woofer output
switchable (“SWITCH
PREOUT” page 9)
Fuse (10A)
Wiring connection
To Kenwood disc changer/
External optional accessory
(To connect these leads, refer to
the relevant instruction manuals.)
Battery
Car fuse box
(Main fuse)
Black (Ground wire)
Yellow (Battery wire)
Red (Ignition wire)
Blue
(Antenna control wire)
Light Blue/Yellow
(Steering remote control
wire )
Brown
(Mute control wire)
Blue/White
(Power control wire)
To the metallic body or chassis of the car
Car fuse box
ACC
Ignition key switch
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna, or
to the power terminal for the booster amplifier of the
film-type or short pole type antenna.
To use the steering wheel remote control feature, you
need to an exclusive remote adapter (not supplied)
matches your car is required.
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
To connect the Kenwood navigation system, consult
your navigation manual.
When using the optional power amplifier, connect to
its power control terminal.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
If no connections are made, do not let the wire come out from the tab.
White
Wiring harness
D
Green
Gray
Purple
White/Black
Green/Black
Gray/Black
Purple/Black
Front output
B64-4835-00̲01̲M̲English.indd 34
B64-4835-00̲01̲M̲English.indd 34
11/03/07 11:10
11/03/07 11:10
