Kenwood KDC-MP628 Instruction Manual Download Page 61

Page: 61 / 64

English

Audio file source

Cannot play an Audio file.

✔

The media is scratched or dirty.

☞

Clean the media, referring to the CD cleaning
of the section on <About CDs> (page 7).

The sound skips when an Audio file is being

played.

✔

The media is scratched or dirty.

☞

Clean the media, referring to the CD cleaning
of the section on <About CDs> (page 7).

✔

The recording condition is bad.

☞

Record the media again or use another media.

The Audio file track time isn’t displayed correctly.

✔

---

☞

There are times when it isn’t displayed

correctly according to the Audio file recording
conditions.

HD Radio source

? No sound can be heard, or the volume is low.

✔

The preset broadcast station is not transmitting

in the mode that was set with <Receive mode
Setting> (page 46).

☞

Please set <Receive mode Setting> to "Auto".

✔

In digital AM broadcasting, receive mode switches

between stereo and monaural too often.

☞

Receiving condition is bad or unstable.

Stereo is chosen when receiving condition is
good, and it switches to monaural when the
condition becomes bad.

✔

HD Radio tuner is connected to KCA-S210A or

other units.

☞

Connect the HD Radio tuner directly to the

control unit.

The messages shown below display your
systems condition.

Eject:

No disc magazine has been loaded in
the changer. The disc magazine is not
completely loaded.

➪

Load the disc magazine properly.

No CD in the unit.

➪

Insert the CD.

No Disc:

No disc has been loaded in the disc
magazine.

➪

Load a disc into the disc magazine.

TOC Error:

No disc has been loaded in the disc
magazine.

➪

Load a disc into the disc magazine.

The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.

➪

Clean the CD and load it correctly.

Error 05:

The CD is upside-down.

➪

Load the CD correctly.

Blank Disc:

Nothing has been recorded on the MD.

No Track:

No tracks are recorded on the MD,
although it has a title.

Error 15:

Media was played that doesn’t have data
recorded that the unit can play.

➪

Use media that has data recorded that

the unit can play.

No Panel:

The faceplate of the slave unit being
connected to this unit has been removed.

➪

Replace it.

Error 77:

The unit is malfunctioning for some reason.

➪

Press the reset button on the unit. If

the "Error 77" code does not disappear,
consult your nearest service center.

Mecha Error:

Something is wrong with the disc
magazine. Or the unit is malfunctioning for
some reason.

➪

Check the disc magazine. And then

press the reset button on the unit. If the
"Mecha Error" code does not disappear,
consult your nearest service center.

B64-2962-00̲K̲r4̲English.Indd 61

04.11.11 11:30:58 AM

Summary of Contents for KDC-MP628

































































Search results

Summary of Contents for KDC-MP628

Reviews:

Related manuals for KDC-MP628

Brands by name

Popular brands

Kenwood KDC-MP628, Instruction Manual

Search results

Summary of Contents for KDC-MP628

Reviews:

Related manuals for KDC-MP628

Brands by name

Popular brands