10
|
KDC-MP5539U/KDC-MP5039U/KDC-MP4039
Menu Operation
Menu System
Set up the following functions;
Display
Setting
Setting overview
Source
“SECURITY
SET”
Refer to
page 10
Sets security code
“CLOCK
ADJUST”
Refer to
page 11
Sets the clock.
“DISPLAY”
ON*/OFF
Turns off the display when no
operation is performed.
—
“DIMMER”*
1
AUTO*/OFF Dims the display in conjunction
with the light switch of the
vehicle.
“DIMMER”*
2
ON/OFF*
Adjusts the brightness of
the display according to the
surrounding illumination.
—
“DOT LINE”
ON*/OFF
Specifies whether to display the
red dotted line on the display.
“SWPRE”
REAR*/
SUB-W
Sets the preout output.
“ZONE2”*
1
REAR*/
FRONT
Specifies the destination of AUX
input sound when the Dual Zone
function is turned on.
“SUPREME”
ON*/OFF
Turns ON/OFF the Supreme
function.
“CRSC”
OFF/ON*
Switches to Monaural to decrease
noise when reception is poor.
“NAME SET” Refer to
page 11
Sets the display when switched
to AUX source.
“SCROLL”
AUTO*/
MANUAL
Specifies whether the text is
scrolled automatically.
—
“AUX”
OFF/ON1*/
ON2
Sets whether to display AUX
during source selection.
“CD READ”
1*/2
Sets the CD read mode.
“DEMO
MODE”
Refer to
page 11
Specifies whether to enable
demonstration.
—
*Factory setting
*1 Function of KDC-MP5539U, KDC-MP5039U.
*2 Function of KDC-MP4039.
Displayed item is depending on currently selected
source. The mark in Source column shows the
source to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set during FM reception.
: Can be set while accessing AUX source.
— : Can be set during all sources.
1
Enter Menu mode
Press the [M.JOG] button for at least 1 second.
“MENU” is displayed.
2
Select the menu item
Push the Control knob towards up or down.
3
Set the menu item
Push the Control knob towards right or left.
4
Exit Menu mode
Press the [M.JOG] button.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• ”ZONE2” is displayed when ”2ZONE” in <Audio Setup>
(page 6) is set to ”ON.
• Refer to the <Appendix> (page 13) for the details of the
menu items.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Security Code
When Security Code is set, possibility of theft
is reduced because input of Security Code is
prompted to turn on the unit once it is turned off.
⁄
• When you activate the Security Code function, it cannot be
released.
Note, your Security Code is the 4 digit number entered in
your “Car Audio Passport” in this package.
1
Select Security Code item during Menu mode
Select the “SECURITY SET” display.
For how to select menu items, refer to <Menu
System>(page 10).
2
Enter Security Code mode
Press the Control knob for at least 1 second.
When “ENTER” is displayed, “CODE” is also displayed.
3
Select the digits to enter
Push the Control knob towards right or left.
4
Select the Security Code numbers
Push the Control knob towards up or down.
5
Repeat steps 3 and 4, and complete the
Security Code.
6
Confirm the Security Code
Press the Control knob for at least 3 seconds.
When “RE-ENTER” is displayed, “CODE” is also
displayed.
B64-3956-00̲English̲M̲r1.indd 10
B64-3956-00̲English̲M̲r1.indd 10
07.11.9 4:44:29 PM
07.11.9 4:44:29 PM
