20
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
P. CONT
ANT CONT
MUTE
Wiring connection
When connecting to an external amplifier, connect its ground
wire to the car’s chassis to avoid damaging the unit.
If your car does not have an ISO terminal :
We recommend installing the unit with a commercially available
custom wiring harness specific for your car and leave this job to
professionals for your safety. Consult your car audio dealer.
Fuse (10 A)
Front/ Rear/ Subwoofer output
Antenna terminal
Light blue/yellow
(Steering remote control
wire)
To the steering wheel remote control
adapter
Blue/White
(Power control wire/
Antenna control wire)
Brown
(Mute control wire)
To the power control terminal when
using the optional power amplifier
or to the antenna control terminal in
the vehicle
To the terminal that is grounded
when the telephone rings or during
conversation (
15
)
(To connect the Kenwood navigation
system, refer your navigations manual.)
Yellow (A4)
Red (Ignition wire)
Red (A7)
Yellow (Battery wire)
Pin
Color and function
A4
Yellow
: Battery
A5
Blue/White
: Power control
A7
Red
: Ignition (ACC)
A8
Black
: Earth (ground) connection
B1
Purple
]
: Rear speaker (right)
B2
Purple/black
[
B3
Gray
]
: Front speaker (right)
B4
Gray/black
[
B5
White
]
: Front speaker (left)
B6
White/black
[
B7
Green
]
: Rear speaker (left)
B8
Green/black
[
ISO connectors
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
Unit
Vehicle
A7 (Red)
Ignition wire
(Red)
A4 (Yellow)
Default wiring
Battery wire
(Yellow)
If no connections are made, do not let the wire come out from the tab.
INSTALLATION / CONNECTION
DAB antenna jack (
5
)
JS_KWD_KDC_DAB400U_EN_EN_1.indd 20
JS_KWD_KDC_DAB400U_EN_EN_1.indd 20
7/10/2015 2:20:12 PM
7/10/2015 2:20:12 PM
