8
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Default:
XX
TUNER SETTING
LOCAL SEEK
ON
: Searches only stations with good reception. ;
OFF
: Cancels.
•
Settings made are applicable only to the selected source/station. Once you change
the source/station, you need to make the settings again.
AUTO
MEMORY
YES
: Automatically starts memorizing 6 stations with good reception. ;
NO
: Cancels.
•
Selectable only if [
NORMAL
] is selected for [
PRESET TYPE
]. (
4
)
MONO SET
ON
: Improves the FM reception, but the stereo effect may be lost. ;
OFF
: Cancels.
NEWS SET
ON
: The unit will temporarily switch to News Programme if available. ;
OFF
: Cancels.
REGIONAL
ON
: Switches to another station only in the specific region using the “AF” control. ;
OFF
: Cancels.
AF SET
ON
: Automatically searches for another station broadcasting the same program
in the same Radio Data System network with better reception when the current
reception is poor. ;
OFF
: Cancels.
TI*
ON
: Allows the unit to temporarily switch to Traffic Information if available (“TI”
lights up). ;
OFF
: Cancels.
*
[TI] in MW/LW band is for enabling traffic interruption to DIGITAL AUDIO source
only.
PTY SEARCH
1
Press the volume knob to enter PTY language selection.
2
Turn the volume knob to select the PTY language (
ENGLISH
/
FRENCH
/
GERMAN
), then press the knob.
3
Turn the volume knob to select the available Program Type (
9
).
4
Press
S
/
T
to start searching.
ANALOG RADIO
Search for a station
1
Press
repeatedly to select TUNER.
2
Press
repeatedly to select FM1/ FM2/ FM3/ MW/
LW.
3
Press
S
/
T
to search for a station.
•
To change the searching method for
S
/
T
: Press
repeatedly.
AUTO1
: Automatically search for a station.
AUTO2
: Search for a preset station.
MANUAL
: Manually search for a station.
•
To store a station
: Press and hold one of the number buttons
(
1
to
6
).
•
To select a stored station
: Press one of the number buttons
(
1
to
6
).
Other settings
1
Press the volume knob to enter [
FUNCTION
].
2
Turn the volume knob to select an item (see the following
table), then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
JS_KWD_KDC_DAB400U_EN_EN_4.indd 8
JS_KWD_KDC_DAB400U_EN_EN_4.indd 8
13/11/2015 10:32:16 AM
13/11/2015 10:32:16 AM
