13
ENGLISH |
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom
Remedy
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
“PROTECT” appears and
no operations can be
done.
Check to be sure the terminals of the speaker wires are
insulated properly, then reset the unit. If this does not solve
the problem, consult your nearest service center.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on
the display is incorrect.
Clean the connectors.
( 2)
The unit does not work at
all.
Reset the unit.
( 3)
DAB reception is poor.
(For
KDC-DAB34U
)
Make
sure
[ON]
is selected for
[DAB ANT POWER]
.
( 5)
“DAB ANT ERR” appears.
Check the DAB antenna. If a passive antenna (without a
booster) is used, set
[DAB ANT POWER]
to
[OFF]
.
( 5)
• Radio reception is poor.
• Static noise while
listening to the radio.
• Connect the antenna firmly.
• Pull the antenna out all the way.
“NA FILE” appears.
Make sure the disc contains supported audio files.
( 12)
“NO DISC” appears.
Insert a playable disc into the loading slot.
“TOC ERROR” appears.
Make sure the disc is clean and inserted properly.
“PLEASE EJECT” appears.
Reset the unit. If this does not solve the problem, consult your
nearest service center.
Disc cannot be ejected.
Press and hold to forcibly eject the disc. Be careful not
to drop the disc when it is ejected. If this does not solve the
problem, reset the unit.
( 3)
Symptom
Remedy
“READ ERROR” appears.
Copy the files and folders onto the USB device again. If this
does not solve the problem, reset the USB device or use
another USB device.
“NO DEVICE” appears.
Connect a USB device, and change the source to USB again.
“COPY PRO” appears.
A copy-protected file is played.
“NA DEVICE” appears.
Connect a supported USB device, and check the connections.
“NO MUSIC” appears.
Connect a USB device that contains playable audio files.
“iPod ERROR” appears.
• Reconnect the iPod.
• Reset the iPod.
Noise is generated.
Skip to another track or change the disc.
Tracks do not play back as
you intended them to play.
Playback order is determined when files are recorded.
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
Elapsed playing time is not
correct.
This is caused by how the tracks are recorded.
Correct characters are not
displayed (e.g. album
name).
This unit can only display uppercase letters, numbers, and a
limited number of symbols. Uppercase Cyrillic letters can also
be displayed if
[RUSSIAN SET]
is set to
[РУССКИЙ BКЛ]
.
( 5)
EN_KDC_DAB34U_EN_2.indd 13
EN_KDC_DAB34U_EN_2.indd 13
11/10/2013 12:54:48 PM
11/10/2013 12:54:48 PM
