57
|
KDC-BT92SD
English
|
58
Bluetooth Setup
Deleting a Registered Bluetooth
device
You can delete a registered Bluetooth device.
1
Enter Bluetooth mode
Press the [
] button.
✍
You can also select from “Settings” in Menu List
mode.
2
Enter Bluetooth device deletion mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”
>
“Pairing”
>
“Device
Delete”.
“(name)” is displayed.
3
Select the Bluetooth device
Turn the [VOL] knob.
4
Delete the selected Bluetooth device
Press the [VOL] knob.
5
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
“Delete” is displayed.
6
Exit BT Settings mode
Press the [
] button.
⁄
• When a registered cell-phone is deleted, its Phone Book,
log, and SMS are also deleted.
Downloading the Phone Book
Download the phone book data from the cell-
phone to this unit so that you can use the Phone
Book of this unit.
To download automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.
⁄
• Setting on the cell-phone may be required.
• If no phone book data is found in the unit even after
the compete display, your cell-phone may not support
automatic download of phone book data. In this case, try
downloading manually.
To download from the cell-phone manually
1
By operating the cell-phone, end the hands-free
connection.
2
By operating the cell-phone, send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.
• During downloading:
“Downloading” is displayed.
• After completion of downloading:
“Completed” is displayed.
3
By operating the cell-phone, start the hands-
free connection.
To clear the downloading completion message
Press any button.
⁄
• Up to 500 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetic alphabetical characters.
Fewer characters can be input depending on the type
of characters.)
• To cancel downloading of the phone book data, operate
the cell-phone.
Bluetooth device registration test
You can check whether a Bluetooth device can be
registered by operating this unit.
1
Enter Bluetooth mode
Press the [
] button for at least 1 second.
Search for a Bluetooth device starts with “Searching”
displayed.
2
Select the Bluetooth device to test
Turn the [VOL] knob to select Bluetooth device
name.
3
Enter BT test mode
Press the [VOL] knob for at least 1 second.
“BT Test Mode” is displayed.
4
Transmit the PIN code.
When pairing is completed successfully, a
connection test starts automatically.
When the connection test is completed, test results
are displayed on a function basis (“OK”: Enabled;
“NG”: Disabled).
Display
Description
“PAIRING”
Registration in this unit
“HFCONNECT”
Hands-free phoning
“AUDCONNECT”
Audio playback
“PB DOWNLOAD”
Phone Book downloading
5
Exit BT test mode
Press the [VOL] knob.
