16
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
ENGLISH
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons
(
1
to
6
).
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select
[CALL HISTORY]
,
[PHONE BOOK]
, or
[NUMBER DIAL]
, then press the knob.
3
Turn the volume knob to select a contact or enter a
phone number.
If a contact is selected, press the volume knob to show
the phone number.
4
Press and hold one of the number buttons (
1
to
6
).
“STORED” appears when the contact is stored.
To erase a contact from the preset memory, select
[NUMBER DIAL]
in step
2
and store a blank number.
Make a call from memory
1
Press
to enter Bluetooth mode.
2
Press one of the number buttons (
1
to
6
).
3
Press the volume knob to call.
“NO MEMORY” appears if there is no contacts stored.
BLUETOOTH®
Other settings
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select an item (see the following table), then press the
knob.
3
Repeat step
2
until the desired item is selected/activated or follow the instructions
stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
BT MODE
PHONE SELECT
Selects the phone or audio device to connect or disconnect.
“
*
” appears in front of the device name when connected.
“
” appears in front of the current playback audio device.
•
You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device
at any time.
AUDIO SELECT
DEVICE DELETE
1
Turn the volume knob to select a device to delete, then press the knob.
2
Turn the volume knob to select
[YES]
or
[NO]
, then press the knob.
PIN CODE EDIT
(0000)
Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a number.
2
Press
S
/
T
to move the entry position.
Repeat
steps
1
and
2
until you finish entering the PIN code.
3
Press the volume knob to confirm.
RECONNECT
ON
: The unit automatically reconnect when the last connected Bluetooth device is within
range. ;
OFF
: Cancels.
AUTO PAIRING
ON
: The unit automatically pair supported Bluetooth device (iPhone/iPod touch/Android
device) when it is connected through USB input terminal. Depending on the operating system
of the connected device, this function may not work. ;
OFF
: Cancels.
INITIALIZE
YES
: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ;
NO
: Cancels.
JS_KWD_KDC_BT710DAB_EN_EN_1.indd 16
JS_KWD_KDC_BT710DAB_EN_EN_1.indd 16
12/21/2016 3:29:31 PM
12/21/2016 3:29:31 PM
