14
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
BLUETOOTH®
Default:
XX
MIC GAIN
–10
—
+10
(
–4
): The sensitivity of the microphone
increases as the number increased.
NR LEVEL
–5
—
+5
(
0
): Adjust the noise reduction level until the
least noise is being heard during a phone conversation.
ECHO CANCEL
–5
—
+5
(
0
): Adjust the echo cancellation delay time until
the least echo is being heard during a phone conversation.
Answer incoming call automatically
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select [
SETTINGS
], then press the
knob.
3
Turn the volume knob to select [
AUTO ANSWER
], then press
the knob.
4
Turn the volume knob to select an item, then press the
knob.
1
to
30
(in seconds)/
OFF
(default)
5
Press and hold
to exit.
To return to the previous setting item, press
.
Make a call
You can make a call from the call history, phonebook, or
dialing the number. Call by voice is also possible if your mobile
phone has the feature.
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the
following table), then press the knob.
3
Repeat step
2
until the desired item is selected/activated
or follow the instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
.
CALL HISTORY
(Applicable only if the phone supports PBAP)
1
Press the volume knob to select a name or a phone number.
• “I” indicates call received, “O” indicates call made, “M” indicates call missed.
•
Press
DISP
to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
2
Press the volume knob to call.
PHONE BOOK
(Applicable only if the phone supports PBAP)
1
Turn the volume knob quickly to enter alphabet search mode (if the phonebook
contains many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
*
), press
J
/
K
.
• To select the desired first letter, turn the volume knob or press
S
/
T
, then
press the knob.
Select “1” to search with numbers and select “
*
” to search with symbols.
2
Turn the volume knob to select a name, then press the knob.
3
Turn the volume knob to select a phone number, then press the knob to call.
•
The phonebook of the connected phone is automatically transferred to the unit
when pairing.
•
Contacts are categorized as: HM (home), OF (office), MO (mobile), OT (other),
GE (general)
•
This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as
“U”.)
NUMBER DIAL
1
Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2
Press
S
/
T
to move the entry position.
Repeat steps
1
and
2
until you finish entering the phone number.
3
Press the volume knob to call.
VOICE
Speak the name of the contact you want to call or the voice command to control the
phone functions.
(
15, Make a call using voice recognition
)
BATT LOW
/
MID
/
FULL
*
: Shows the strength of the battery.
NO SIGNAL
/
LOW
/
MID
/
MAX
*
: Shows the strength of the current received signal.
*
Functionality depends on the type of the phone used.
JS_KWD_KDC_BT700DAB_EN_EN_1.indd 14
JS_KWD_KDC_BT700DAB_EN_EN_1.indd 14
11/11/2015 10:45:53 AM
11/11/2015 10:45:53 AM
