24
English
Function settings
1
Press SRC to select a source other than “STANDBY”.
2
Press the volume knob to enter
[FUNCTION]
mode.
3
Turn the volume knob to select
[AUDIO CONTROL]
or
[SETTINGS]
, then press to enter.
4
Turn the volume knob to make a selection, then press to confirm.
■
■
See table below for selection.
■
■
Repeat step 4 until the desired item is selected/activated.
■
■
Press to return to the previous item.
5
Hold to finish the procedure.
[AUDIO CONTROL]
: While listening to any source except in STANDBY state or Bluetooth mode.
Item
Selectable setting (Preset: *)
SUB-W LEVEL
–15 — 0 * — +15:
Adjusts the subwoofer output level.
BASS LEVEL
–8 — 0 * — +8:
Source tone memory: Adjusts the level to memorize in each source. (Before making an
adjustment, select the source you want to adjust.)
MID LEVEL
TRE LEVEL
EQ PRO
KDC-X696 only
BASS ADJUST
BASS CTR FRQ
60/ 80/ 100 */ 200:
Selects the center frequency.
BASS LEVEL
–8 — 0 * — +8:
Adjusts the level.
BASS Q FACTOR 1.00 */ 1.25/ 1.50/ 2.00:
Adjusts the quality factor.
BASS EXTEND
ON:
Turns on the extended bass. ;
OFF *:
Cancels.
MID ADJUST
MID CTR FRQ
0.5K/ 1.0K */ 1.5K/ 2.5K:
Selects the center frequency.
MID LEVEL
–8 — 0 * — +8:
Adjusts the level.
MID Q FACTOR 0.75/ 1.00 */ 1.25:
Adjusts the quality factor.
TRE ADJUST
TRE CTR FRQ
10.0K/ 12.5K */ 15.0K/ 17.5K:
Selects the center frequency.
TRE LEVEL
–8 — 0 * — +8:
Adjusts the level.
PRESET EQ
NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL:
Selects a preset sound mode suitable
to the music genre. (Selects
[USER]
to use the customized bass, middle, and treble settings.)
BASS BOOST
B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3:
Selects your preferred bass boost level. ;
OFF *:
Cancels.
LOUDNESS
LOUDNESS LV1 */ LOUDNESS LV2:
Selects your preferred low and high frequencies boost to produce a well-
balanced sound at a low volume level. ;
OFF:
Cancels.
BALANCE
L15 — 0 * — R15:
Adjusts the left and right speaker output balance.
FADER
R15 — 0 * — F15:
Adjusts the rear and front speaker output balance.
SUBWOOFER SET
ON *:
Turns on the subwoofer output. ;
OFF:
Cancels.
DETAILED SET
HPF
THROUGH *:
All signals are sent to the front speaker. ;
100/ 120/ 150 (HZ):
Frequencies lower than the specified value are cut off.
LPF
SUBWOOFER
THROUGH *:
All signals are sent to the subwoofer. ;
85/ 120/ 160 (HZ):
Frequencies higher than the specified value are cut off.
SUB-W PHASE REVERSE
(180°)
/ NORMAL
(0°)
*:
Selects the phase angle of the subwoofer output to be in line with the
speaker output for optimum performance. (Selectable only if a setting other than
[THROUGH]
is selected for
[LPF SUBWOOFER]
.)
B64-4919-00_02_K.indb 24
11/12/21 9:33
