36
|
KDC-BT52U
English
|
37
Operation for hands-free phoning
Speed dialing (Preset dial)
1
Enter the Bluetooth mode
Press the [ ] button.
“BT MODE” is displayed.
2
Select the Preset dial mode
Turn the Control knob to select “Preset Call”,
and then press the Control knob.
3
Select the number you want to recall from the
memory
Turn the Control knob to select a recall number
(“P1” – “P6”), and then press the Control knob.
4
Make a call
Press the [ ] button.
⁄
•
You need to register the preset dial number. Refer to
<Registering in the preset dial number list> (page 36)
.
Registering in the preset dial number
list
1
Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dialing a number/ Calling a number in the call log/
Calling a number in the phone book
2
Enter the Preset memory mode
Press the [PRESET] button.
3
Select a number and store it in the memory
Turn the Control knob to select memory
number (“P1” – “P6”), and then press and hold
the Control knob.
Canceling the Preset memory mode
Press the [ ] button.
During a call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private mode
Push the Control knob rightward or leftward.
Pressing this knob each time switches between the
private talk mode (“PRIVATE”) and hands-free talk
mode.
⁄
•
Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection. If
this happens, the source cannot be switched back to the
hands-free talk mode by operating this unit. Operate your
cell-phone to return to the hands-free talk mode.
Adjusting the voice volume during a call
Turn the Control knob.
Call waiting
Answering another incoming call with the
current call suspended
Press the [ ] button.
Answering another incoming call after
terminating the current call
Press the [SRC] button.
Continuing the current call
1
Press the Control knob.
2
Turn the Control knob to select “Reject”, and
then press the Control knob.
Answering the waiting call after terminating
the current call
Press the [ ] button.
Switching between the current call and waiting
call
Press the Control knob.
Pressing this knob each time switches between the
calling parties.
