ENGLISH
5
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
GETTING STARTED
[DISPLAY]
[EASY MENU]
(For
)
When entering
[FUNCTION]
...
[ON]
:
[ZONE 1]
illumination changes to white color. ;
[OFF]
:
[ZONE 1]
illumination remains as
[COLOR SELECT]
color. (Page 24)
•
[ZONE 2]
illumination changes to light blue color when you enter
[FUNCTION]
,
irregardless of the
[EASY MENU]
setting.
• Refer to the illustration on page 23 for zone identification.
[TUNER SETTING]
[PRESET TYPE]
[NORMAL]
: Memorizes one station for each preset button in each band (FM1/
FM2/FM3/MW/LW). ;
[MIX]
: Memorizes one station for each preset button,
regardless of the selected band.
[SYSTEM]
[KEY BEEP]
(Applicable only if [X’OVER] is set to [2WAY].)
[ON]
: Activates the keypress tone. ;
[OFF]
: Deactivates.
[SOURCE SELECT]
[SPOTIFY SRC]
[ON]
: Enables SPOTIFY/SPOTIFY BT in source selection. ;
[OFF]
: Disables.
(Page 10)
[BUILT-IN AUX]
[ON]
: Enables AUX in source selection. ;
[OFF]
: Disables. (Page 7)
[P-OFF WAIT]
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in standby
mode) to save the battery.
[20M]
: 20 minutes ;
[40M]
: 40 minutes ;
[60M]
: 60 minutes ;
[– – –]
: Cancels
[CD READ]
[1]
: Automatically distinguishes between audio file disc and music CD. ;
[2]
: Forces
to play as a music CD. No sound can be heard if an audio file disc is played.
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx]
[YES]
: Starts upgrading the firmware. ;
[NO]
: Cancels (upgrading is not activated).
For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.
[FACTORY RESET]
[YES]
: Resets the settings to default (except the stored station). ;
[NO]
: Cancels.
[CLOCK]
[CLOCK DISPLAY]
[ON]
: The clock time is shown on the display even when the unit is
turned off. ;
[OFF]
: Cancels.
[ENGLISH]
Select the display language for
[FUNCTION]
menu and music
information if applicable.
By default,
[ENGLISH]
is selected.
[РУССКИЙ]
[ESPANOL]
[FRANCAIS]
Change the crossover type
1
Press
B
SRC repeatedly to enter STANDBY.
2
Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3
Turn the volume knob to select “2WAY” or “3WAY”, then press
the knob.
4
Turn the volume knob to select “YES” or “NO”, then press the
knob.
The selected crossover type appears.
• To cancel, press and hold
.
• To adjust the selected crossover settings, see page 20.
Caution
Select a crossover type according to how the speakers are connected.
(Page 32, 33)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
JS_KWD_KDC_BT530U_EN_EN_2.indd 5
JS_KWD_KDC_BT530U_EN_EN_2.indd 5
5/30/2018 9:47:12 AM
5/30/2018 9:47:12 AM
