15
KDC-BT40U/BT645U
KDC-U546BT
TEST MODE
■
Test mode in CD source
Display mode default
P-Time
• Procedure in CD-DA media (KTD-02A)
Key
Description of display
Operation
Track up procedure
Every time pressed, jumps to the track shown below.
No.9
→
No.15
→
No.10
→
No.22
→
No.12
→
No.13
→
No.14
→
No.9 (recursive)
But in case the disc has 8 tracks or less, playback starts
with track No.1 (at both of CD-DA and compressed
fi
le disc).
Track down
procedure
Goes down by 1 track from the currently played track.
1
Jump procedure
Jump to No.28. (0.7mm scratch for MUSIC line vibration
test)
2
Jump procedure
Jump to No.14. (Blurring surface disc: TCD-731RA Tr14)
3
(forward
rotation)
Information display
Mechanism model name
Mechanism version
9
B
3
0 :
Mechanism model name and mechanism version display
Information display
Mechanism Servo
version
S
E
R
V :
Mechanism servo table version display
Information display
Mechanism Boot
program version
B
O
O
T :
Mechanism boot program version display
4
Jump procedure
Jump to No.15. Set the volume value to “26”.
(For 20Hz 0dB DC protection error operation FCT checking)
5
Jump procedure
∗
Switch the track jump from No.9 to No.22 or
from No.22 to No.9 (No.9
↔
No.22)
When the track No.22 is being played back, this key makes
the track jump to No.9.
When the track No.9 is being played back, this key makes
the track jump to No.22.
6
PLAY/PAUSE
procedure
This key is to switch from PLAY to PAUSE and vice versa
(PLAY/PAUSE). (Normal operation)
• Procedure in compressed media
Key
Description of display
Description
–
File format display (MP3)
M
P
3
The
fi
le format is displayed just before the
fi
le playback.
–
File format display (WMA)
W
M
A
–
File format display (AAC)
A
A
C
■
Backup current measurement
Procedure
Note
Power on during ACC OFF (Back Up ON)
MUTE terminal is turned OFF after 2 seconds, not after 15 seconds.
(During this time, the CD mechanism does not function.)
