10
KDC-BT40U/BT645U
KDC-U546BT
TEST MODE
Key
Description of display
Description
■
BAND BT device search
(The display blinks)
S
E
A
R
C
H
I
N
G
Press and hold this key for 1 second to initiate the BT device
search.
The search is terminated when 1 device is found.
X
X
X
X
X
X
X
X
X
X
X
X
X
When a device is found after the search, the name of that
device is displayed.
U
N
K
N
O
W
N
Only when no device is found after the search, press the
[ROTARY] key brie
fl
y to re-initiate the search.
After the completion of the search, press and hold the [BAND]
key for 1 second to exit from the test mode.
Audio data
initialization
A
U
D
I
O
I
N
I
T
Audio setting value is re-set to the Test mode default value.
■
Clear the BT related
memory information
*1
I
N
I
T
I
A
L
I
Z
E
Press and hold this key for 2 seconds.
The character string as shown in the left cell is displayed
while the BT related memory is being initialized.
B
T
I
N
I
T
: O
K
B
T
I
N
I
T
: N
G
This is to initialize the BT related memory to its factory de-
fault condition.
When the initialization is successfully completed, “OK” (up-
per) is displayed, and when the initialization is abnormally
completed, “NG” (lower) is displayed.
Forced Power OFF
information display
P
O
F
F
–
–
–
No forced Power OFF
P
O
F
F
P
N
L
Forced power OFF by communication error between system
μ
-com and panel.
■
While the forced power OFF data is displayed, press and
hold for 2 seconds to clear the data.
VOICE
CD information
display mode
ON/OFF
Transition to the CD information
display mode (sub-mode)
∗
Refer to “CD information display mode” for the details of
display and operation procedure. Press [VOICE] key brie
fl
y.
■
VOICE
Clear all of the CD information
Press and hold this key for 2 seconds in the CD information
display mode to clear all of the CD information.
Press and hold the [VOICE] key.
SEARCH
Information display
iPod authentication
IC installation
condition display
i
P
o
d
:
i
P
o
d
: O
K
i
P
o
d
: N
G
i
P
o
d
:
∗
∗
iPod authentication IC installation condition display
When the display in the left cell is shown, press this key to
return to the normal display.
Blank: Searching and deciding the present status.
OK: Authentication IC has been installed.
NG: This is the iPod compatible model, but the
authentication IC is not yet installed.
∗
∗
: This is not the iPod compatible model.
■
SEARCH Preout switching
S
W
P
R
E
R
E
A
R
Pressing and holding this key for 1 second switches the
preout.
S
W
P
R
E
S
U
B
–
W
RETURN
All lights ON /
All lights OFF
÷
÷
÷
÷
÷
÷
÷
Switch from “All lights ON” to “All lights OFF” and vice
versa.
÷
÷
÷
÷
÷
÷
÷
*1: This is a function to clear the information recorded in the
fl
ash memory, to clear the data
fl
ash ROM that has BT memory information to be
initialized with the “Data
fl
ash ROM clear” function, and to write the speci
fi
c values in the ROM to initialize it to its factory default condition.
• Factory default condition
· To clear the pairing information (in the
fl
ash memory of the BT module)
· To clear the preset telephone numbers (in the data
fl
ash ROM)
· To write “KENWOOD BT CD/R-3P2” in the friendly name (in the
fl
ash memory of the BT module)
· To write “0000” in the PIN code (in the
fl
ash memory of the BT module)
