ENGLISH
19
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
BLUETOOTH®
Other settings
1
Press the volume knob to enter
[FUNCTION
].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step
2
until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
BT MODE
PHONE SELECT
Selects the phone or audio device to connect or disconnect.
“
*
” appears in front of the device name when connected.
•
You can only connect a maximum of two Bluetooth phones and one
Bluetooth audio device at any time.
AUDIO SELECT
DEVICE DELETE
1
Turn the volume knob to select a device to delete, then press the knob.
2
Turn the volume knob to select [
YES
] or [
NO
], then press the knob.
PIN CODE EDIT
(0000)
Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a number.
2
Press
S
/
T
to move the entry position.
Repeat
steps
1
and
2
until you finish entering the PIN code.
3
Press the volume knob to confirm.
RECONNECT
ON
: The unit automatically reconnect when the last connected Bluetooth
device is within range. ;
OFF
: Cancels.
AUTO PAIRING
ON
: The unit automatically pair supported Bluetooth device (iPhone/
iPod touch/ Android device) when it is connected through USB input
terminal. Depending on the operating system of the connected device, this
function may not work. ;
OFF
: Cancels.
INITIALIZE
YES
: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ;
NO
: Cancels.
Bluetooth test mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold
.
“PLEASE PAIR YOUR PHONE PIN 0000” appears.
2
Search and select this unit model name (KDC-BT3
**
U/
KDC-BT2
**
U/ KDC-X3
**
/ KDC-MP3
**
BT/ KMR-D3
**
BT) on
the Bluetooth device.
3
Operate the Bluetooth device to confirm pairing.
“TESTING” flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing
status
HF CNT:
Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
PB DL:
Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold
to turn off the unit.
JS_KWD_KDC_BT365U_KN_EN_3.indd 19
JS_KWD_KDC_BT365U_KN_EN_3.indd 19
9/7/2015 12:00:46 PM
9/7/2015 12:00:46 PM
