ENGLISH
17
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
BLUETOOTH®
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter [
FUNCTION
].
2
Turn the volume knob to select an item (see the following
table), then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN
–10
—
+10
(
–4
): The sensitivity of the microphone increases as
the number increased.
NR LEVEL
–5
—
+5
(
0
): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL
–5
—
+5
(
0
): Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following
table), then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
SETTINGS
AUTO ANSWER
1
—
30
: The unit answers incoming call automatically in the selected time
(in seconds). ;
OFF
: Cancels.
BATT/SIGNAL*
(For
/
/
)
AUTO
: Shows the strength of the battery and signal when the unit detects a
Bluetooth device and the Bluetooth device is connected. ;
OFF
: Cancels. Clock
time is shown.
*
Functionality depends on the type of the phone used.
Make a call
You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step
2
until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
.
CALL HISTORY
(Applicable only if the phone supports PBAP)
1
Press the volume knob to select a name or a phone number.
•
/
/
: “INCOMING”,
“OUTGOING”, or “MISSED” is shown on the lower part of the display to
indicate the previous call status.
/
: “I” indicates call received, “O”
indicates call made, “M” indicates call missed.
•
Press
DISP
to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
2
Press the volume knob to call.
JS_KWD_KDC_BT365U_KN_EN_9.indd 17
JS_KWD_KDC_BT365U_KN_EN_9.indd 17
18/9/2015 4:17:59 PM
18/9/2015 4:17:59 PM
