4
KDC-8026/MP825
KDC-MPV8025/W7027
Ref No.
Application / Functions
Operation / Condition / Compatibility
IC7
AVR
BU2.5V AVR
IC8
Selector IC
Serial audio data selector
IC9
AVR
3.3V AVR (IC2 DAC part)
Q1,4
Level shift FET
Level shift (3.3V - 5.0V)
Q3,5
Level shift TR
Level shift (3.3V - 5.0V)
Q6
Level shift TR
Level shift (3.3V - 5.0V)
Q7
Level shift TR
Level shift (3.3V - 5.0V)
Q8
APC
Auto power control
Q9,10
Switching TR
Sub beam delay control switch
●
ELECTRIC UNIT (X34-3040-10/11/21, X34-3042-71)
Ref No.
Application / Functions
Operation / Condition / Compatibility
IC1
System control IC
System control microprocessor
IC2
E-VOL & tuner IC
E-VOL. FM/AM tuner & stereo decoder
IC3
Power supply IC
For A8V AVR
IC4
Audio power IC
Audio power amplifier
IC5
Power supply IC
Switching regulator IC for CD5V
IC7
Reset IC
When BU5V line voltage is less than 3.5V, this IC output line is “L”
IC8
Muting logic IC
Control for MUTE, P-ANT & RESET muting
IC12
RDS decoder
Decode for RDS signal
IC13,14
Motor driver
Control for Panel mechanism motor
Q1,2
BU 5V AVR
While BU is applied when BU5V regulator output is +5V
Q3
SW5V AVR
When Q3base level goes L, SW5V regulator output is +5V
Q4,5
SW14V AVR
When Q5 base level goes H, SW14V regulator output is +14V
Q6-8
Audio 8V AVR
When Q6 base level goes H, A8V regulator output is +8.4V
Q9,34
Servo +B AVR
When Q34 base level goes H, S+B regulator output is +7.4V
Q11~14
IllumiB AVR
When Q11 base level goes H, AVR output is +10.5V
Q23,24
P-ANT SW
When Q23 base level goes H, P-ANT SW output is +14V
Q25,26
P-CON SW
When Q26 base level goes H, P-CPN SW output is +14V
Q27,28
P-CON protection
Protect Q27 by turning on when P-CON output is grounded
Q29
Buffer
EX amp control buffer
Q30
Small lamp det. SW
When Q30 base level goes H, Q30 turned ON
Q32
BU detector
When Q32 base level goes H, Q32 turned ON
Q33
ACC detector
When Q33 base level goes H, Q33 turned ON
Q51,52
Muting driver
When base level goes L, muting driver is turned ON
Q55,56,59,60
Pre-out muting SW
When base level goes H, Pre-output is muted
Q63
E2P 5V SW
When Q63 base level goes L, E2P 5V is out for E2P ROM
Q102,103
AM +B SW
When Q102 base level goes H, AM +B is out to tuner unit
Q104
Buffer
Composite signal buffer for RDS
COMPONENTS DESCRIPTION