12
|
English
General features
Audio Control
1
Select the source for adjustment
Press the [SRC] button.
2
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "AUD" is
displayed above the [2] button.
Refer to 'Notes on Multi-function Key System'
(page 9).
3
Enter Audio Control mode
Press the [2] ("AUD") button.
4
Select the Adjustment item section
Press the [NEXT] button.
Repeatedly press the button until the desired
Adjustment item is displayed above the [2] — [5]
button.
1st section
Adjustment Item
Button
Display
Bass
[2]
"BASS"
Middle
[3]
"MID"
Treble
[4]
"TRE"
Subwoofer*
[5]
"SW"
2nd section
Adjustment Item
Button
Display
High Pass Filter
[2]
"HPF"
Low Pass Filter*
[3]
"LPF"
Loudness
[4]
"LOUD"
Balance & Fader
[5]
"BL/F"
3rd section
Adjustment Item
Button
Display
Volume offset
[2]
"VOFF"
5
Select the Audio Control item for
adjustment
Press the [2] — [5] button.
Each time the [2] — [5] button is pressed the
adjustable audio items are switched among
ranges of all stage section’s tables on the
following pages.
6
Adjust the Audio Control item
Press the [
4
] or [
¢
] button.
Each time the button is pressed the setting
switches as shown below.
• The Adjustment item can also be controlled by the
rotary volume knob. Refer to 'Rotary Volume knob
operation mode select'(page 13).
7
Exit Audio Control mode
Press the [6] button.
• The loudness setting can also be adjusted by pressing
the [4] button.
• * This mode is available only when 'Subwoofer Output'
(page 11) is ON.
1st section
[2] button
Adjustment Item
Display
Range
Bass level
"Bass"
–8 — +8
[3] button
Adjustment Item
Display
Range
Middle level
"Middle"
–8 — +8
[4] button
Adjustment Item
Display
Range
Treble level
"Treble"
–8 — +8
[5] button
Adjustment Item
Display
Range
Subwoofer level
"SW Level"
–15 — +15
B64-2745-00̲U.S(M).Indd 12
03.11.27, 3:26:31 PM