3rd section
[2] button
Adjustment Item Display
Range
Volume offset
"V-Offset"
–8 — ±0
Volume offset: Each source's volume can be set as a difference
from the basic volume.
[3] button
Adjustment Item Display
Range
Non-Fading
"LPF NF"
50/80/120/Through Hz
Low Pass Filter
[4] button
Adjustment Item Display
Range
Loudness
"LOUD"
ON/OFF
[5] button
Adjustment Item Display
Range
Non-Fading level
"NF Level"
–15 — +15
• Loudness: Compensating for low and high tones during low
volume.
• When the Dual Zone System is ON, the setting for the High Pass
Filter is nullified.
2nd section
[2] button
Adjustment Item
Display
Range
Front/Rear "HPF"
High Pass Filter
Through/100/125/170 Hz
[3] button
Adjustment Item
Display
Range
Middle Center
Frequency
"MID F"
0.5/1.0/1.5/2.0 kHz
Middle level
"Middle"
–8 — +8
Middle Q Factor
"Middle Q"
1.0/2.0
[4] button
Adjustment Item
Display
Range
Treble Center
Frequency
"TRE F"
10.0/12.5/15.0/17.5 kHz
Treble level
"Treble"
–8 — +8
[5] button
Adjustment Item
Display
Range
Balance
"Balance"
Left 15 — Right 15
Fader
"Fader"
Rear 15 — Front 15
• According to the Bass Q Factor setting value, the frequencies that
can be set in Bass Center Frequency change as shown below.
Bass Q Factor
Bass Center Frequency
1.00/1.25/1.50
60/70/80/100
2.00
60/70/80/150
• When the bass extend is set to ON, low frequency response is
extended by 20%.
— 13 —
KDC-M7024_U.S_r2 03.1.15 10:10 AM Page 13
Summary of Contents for KDC-7024
Page 25: ... 25 Disc number ndicator ...
Page 30: ... 30 ...
Page 49: ... 49 49 section on section on rding to the st service source is not ode ...
Page 52: ......
