9
ENGLISH |
AUDIO SETTINGS
While listening to any source...
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select
[AUDIO CTRL]
, then press the knob.
3
Turn the volume knob to make a selection (see the table below), then press
the knob.
Repeat
step
3
until the desired item is selected or activated.
4
Press and hold
to exit.
• To return to the previous hierarchy, press
.
Default:
For
KDC-U4556
/
KDC-U3556
/
KDC-3757URM
/
KDC-3657UGM
:
XX
For
KDC-U4556
/
KDC-U3556
:
XX
*
1
For
KDC-3757URM
/
KDC-3657UGM
:
XX
*
2
SUB-W LEVEL
–15
to
+15
(
0
):
Adjusts the subwoofer output level.
BASS LEVEL
–8
to
+8
(
+8
*
1
/
0
*
2
):
Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you
want to adjust.)
MID LEVEL
–8
to
+8
(
+2
*
1
/
0
*
2
):
TRE LEVEL
–8
to
+8
(
+3
*
1
/
0
*
2
):
EQ PRO
BASS ADJUST
BASS C FRQ
60/ 80/ 100/ 200
:
Selects the center frequency.
BASS LEVEL
–8
to
+8
(
+8
*
1
/
0
*
2
):
Adjusts the level.
BASS Q FCTR
1.00/ 1.25/ 1.50/ 2.00
:
Adjusts the quality factor.
BASS EXTEND
ON
*
1
:
Turns on the extended bass.
;
OFF
*
2
:
Cancels.
MID ADJUST
MID C FRQ
0.5K/ 1.0K
*
2
/ 1.5K/ 2.5K
*
1
:
Selects the center
frequency.
MID LEVEL
–8
to
+8
(
+2
*
1
/
0
*
2
):
Adjusts the level.
MID Q FCTR
0.75/ 1.00/ 1.25
:
Adjusts the quality factor.
TRE ADJUST
TRE C FRQ
10.0K/ 12.5K/ 15.0K/ 17.5K
:
Selects the center
frequency.
TRE LEVEL
–8
to
+8
(
+3
*
1
/
0
*
2
):
Adjusts the level.
PRESET EQ
NATURAL
*
2
/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL
*
1
:
Selects a preset equalizer suitable to the music genre. (Select
[USER]
to use the
customized bass, middle, and treble settings.)
BASS BOOST
B.BOOST LV1
*
1
/ B.BOOST LV2/ B.BOOST LV3
:
Selects your preferred
bass boost level.
;
OFF
*
2
:
Cancels.
LOUDNESS
LOUD LV1
*
2
/
LOUD LV2
:
Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
level.
;
OFF
*
1
:
Cancels.
BALANCE
L15
to
R15
(
0
):
Adjusts the left and right speaker output balance.
FADER
R15
to
F15
(
0
):
Adjusts the rear and front speaker output balance.
SUB-W SET
ON
:
Turns on the subwoofer output.
;
OFF
:
Cancels.
DETAIL SET
HPF
For
KDC-U4556
:
THROUGH
:
All signals are sent to the speakers.
;
100HZ
/
120HZ
/
150HZ
:
Audio signals with frequencies higher than 100 Hz/ 120 Hz/
150 Hz are sent to the speakers.
LPF SUB-W
THROUGH
:
All signals are sent to the subwoofer.
;
85HZ
/
120HZ
/
160HZ
:
Audio signals with frequencies lower than 85 Hz/ 120 Hz/
160 Hz are sent to the subwoofer.
SUB-W PHASE
REV
(180°)/
NORM
(0°):
Selects the phase of the subwoofer output to
be in line with the speaker output for optimum performance. (Selectable
only if a setting other than
[THROUGH]
is selected for
[LPF SUB-W]
.)
SUPREME SET
ON
:
Creates realistic sound by interpolating the high-frequency
components that are lost in AAC/MP3/WMA audio compression.
;
OFF
:
Cancels.
(
Selectable only when playing back an AAC/MP3/WMA
disc or a USB device, except iPhone/iPod.)
VOL OFFSET
(Default:
0
)
–8
to
+8
(for AUX) ;
–8
to
0
(for other sources):
Presets the volume
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
Except for
KDC-U4556
:
•
[SUB-W LEVEL]
/
[SUB-W SET]
/
[LPF SUB-W]
/
[SUB-W PHASE]
is selectable only if
[SWITCH PRE]
is set to
[SUB-W]
. (
➜
4
)
•
[SUB-W LEVEL]
/
[LPF SUB-W]
/
[SUB-W PHASE]
is selectable only if
[SUB-W SET]
is set
to
[ON]
.
EN_KDC-U4556[MWM0]f.indd 9
EN_KDC-U4556[MWM0]f.indd 9
8/7/12 2:45:20 PM
8/7/12 2:45:20 PM
