12
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AUDIO SETTINGS
While listening to any source...
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select
[AUDIO CONTROL]
, then press the knob.
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
Repeat
step
3
until the desired item is selected or activated.
4
Press and hold
to exit.
(or
using
RC-406)
1
Press
AUD
to enter
[AUDIO CONTROL]
.
2
Press
J
/
K
to make a selection, then press
ENT
IW
.
To return to the previous setting item or hierarchy, press
.
Default:
XX
SUB-W LEVEL –15 to +15 (0):
Adjusts the subwoofer output level.
BASS LEVEL
–8 to +8 (+6):
Adjusts the level to memorize for each source. (Before
making an adjustment, select the source you want to
adjust.)
MID LEVEL
–8 to +8 (+5):
TRE LEVEL
–8 to +8 (0):
EQ PRO
(for
KDC-X398
)
BASS ADJUST BASS CTR FRQ
60
/
80
/
100
/
200HZ
: Selects the center frequency.
BASS LEVEL
–8
to
+8
(
+6
): Adjusts the level.
BASS Q FACTOR 1.00
/
1.25
/
1.50
/
2.00
: Adjusts the quality factor.
BASS EXTEND
ON
: Turns on the extended bass. ;
OFF
: Cancels.
MID ADJUST MID CTR FRQ
0.5
/
1.0
/
1.5
/
2.5KHZ
: Selects the center frequency.
MID LEVEL
–8
to
+8
(
+5
): Adjusts the level.
MID Q FACTOR
0.75
/
1.00
/
1.25
: Adjusts the quality factor.
TRE ADJUST
TRE CTR FRQ
10.0
/
12.5
/
15.0
/
17.5KHZ
: Selects the center frequency.
TRE LEVEL
–8
to
+8
(
0
): Adjusts the level.
PRESET EQ
DRIVE EQ
/
TOP40
/
POWERFUL
/
ROCK
/
POPS
/
EASY
/
JAZZ
/
NATURAL
/
USER
: Selects a preset equalizer suitable to the music
genre. (Select
[USER]
to use the customized bass, middle, and treble
settings.)
[DRIVE EQ]
is a preset equalizer that reduces noise from the road.
BASS BOOST
LEVEL1
/
LEVEL2
/
LEVEL3
:
Selects your preferred bass boost level.
;
OFF
:
Cancels.
LOUDNESS
LEVEL1
/
LEVEL2
: Selects your preferred low and high frequencies
boost to produce a well-balanced sound at a low volume level. ;
OFF
: Cancels.
SUBWOOFER
SET
ON
: Turns on the subwoofer output. ;
OFF
: Cancels.
LPF
SUBWOOFER
THROUGH
: All signals are sent to the subwoofer. ;
85HZ
/
120HZ
/
160HZ
: Audio signals with frequencies lower than 85 Hz/ 120 Hz/
160 Hz are sent to the subwoofer.
SUB-W
PHASE
REVERSE
(180°)/
NORMAL
(0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than
[THROUGH]
is selected for
[LPF SUBWOOFER]
.)
HPF
THROUGH
: All signals are sent to the speakers. ;
100HZ
/
120HZ
/
150HZ
: Audio signals with frequencies higher than 100 Hz/ 120 Hz/
150 Hz are sent to the speakers.
FADER
R15
to
F15
(
0
): Adjusts the rear and front speaker output balance.
BALANCE
L15
to
R15
(
0
): Adjusts the left and right speaker output balance.
VOLUME
OFFSET
(Default:
0
)
–8
to
+8
(for AUX) ;
–8
to
0
(for other sources): Presets the volume
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
SOUND
RECNSTR
(Sound
reconstruction)
ON
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ;
OFF
: Cancels.
[SUB-W LEVEL]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE]
is selectable only if
[SUBWOOFER SET]
is set to
[ON]
.
EN_KDC-X398[KW_K0]f.indd 12
EN_KDC-X398[KW_K0]f.indd 12
29/8/2013 5:04:27 PM
29/8/2013 5:04:27 PM
