background image

English

   

|

   

31

The messages shown below display your 
systems condition.

EJECT:  

No disc magazine has been loaded in 
the changer. The disc magazine is not 
completely loaded.

  Load the disc magazine properly.

 

No CD in the unit.

 Insert the CD.

NO DISC:  

No disc has been loaded in the disc 
magazine.

  Load a disc into the disc magazine.

TOC ERR:  

No disc has been loaded in the disc 
magazine.

  Load a disc into the disc magazine.

 

The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.

  Clean the CD and load it correctly.

E-05:  

The CD is upside-down.

  Load the CD correctly.

BLANK:  

Nothing has been recorded on the MD.

NO TRACK:  

No tracks are recorded on the MD, 
although it has a title.

E-15: 

Media was played that doesn’t have data 
recorded that the unit can play.

  Use media that has data recorded that 

the unit can play.

NO PANEL:  

The faceplate of the slave unit being 
connected to this unit has been removed.

 Replace it.

E-99:  

Something is wrong with the disc 
magazine. Or the unit is malfunctioning for 
some reason.

  Check the disc magazine. And then 

press the reset button on the unit. If the 
"E-99" code does not disappear, consult 
your nearest service center.

HOLD:  

The protective circuit in the unit activates 
when the temperature inside the 
automatic disc changer exceeds 60°C 
(140°F), stopping all operation.

  Cool down the unit by opening 

the windows or turning on the air 
conditioner. As the temperature falls 
below 60°C (140°F), the disc will start 
playing again.

LOAD:  

Discs are being exchanged in the Disc 
changer.

READING:  

The unit is reading the data on the disc.

IN (Blink):  

The CD player section is not operating 
properly.

  Reinsert the CD. If the CD cannot be 

ejected or the display continues to flash 
even when the CD has been properly 
reinserted, please switch off the power 
and consult your nearest service center.

NA FILE: 

A MP3/WMA is played with a format that 
this unit can’t support.

 ----

COPY PRO: 

 A copy-protected file is played.

 ----

B64-2932-00̲English.indd   31

B64-2932-00̲English.indd   31

04.9.30   4:37:43 PM

04.9.30   4:37:43 PM

Summary of Contents for KDC-3031A

































Reviews: