12
Wiring connection
Fuse (10 A)
Antenna terminal
Rear/subwoofer output terminals
Blue/White
(Power control wire)
Brown
(Mute control wire)
Blue
(Antenna control wire)
To the terminal that is grounded when either the telephone rings
or during conversation. (To connect the Kenwood navigation
system, consult your navigation manual.)
Car fuse box
Car fuse box
Battery
Ignition key switch
Red (Ignition wire)
White
Gray
Green
Purple
White/Black
Gray/Black
Green/Black
Purple/Black
Yellow (Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
To the power control terminal of the optional power amplifier
To the control terminal of the motor antenna
Installing the unit
2
1
Connect the wiring harness to the unit. Other wiring
connection has been completed earlier. (See above.)
Before attaching, make sure
the direction of the
escutcheon is correct. (Wider
hooks on the top side.)
Dashboard of your car
Bend the appropriate tabs
to hold the mounting
sleeve firmly in place.
EN02-13_KDC-153[M]f.indd 12
EN02-13_KDC-153[M]f.indd 12
7/19/11 11:00:10 AM
7/19/11 11:00:10 AM
