10
[SETTINGS]
Item
Selectable setting (Preset: *)
AUX NAME AUX */ DVD/ PORTABLE/ GAME/ VIDEO/ TV:
Selects the desired name for the connected component. (Selectable
only if “AUX” is selected as the source.)
CLOCK
CLOCK ADJ:
(For details, refer page 5.)
DISPLAY
DIMMER SET: ON:
Dims the display illumination. ;
OFF *:
Cancels.
TEXT SCROLL: AUTO */ ONCE:
Selects to scroll the display information automatically, or scroll only once. ;
OFF:
Cancels.
Troubleshooting
Symptom
Remedy/Cause
Sound cannot be heard.
Adjust the volume to the optimum level. / Check the cords and connections.
“PROTECT” appears and no
operations can be done.
Check to be sure the terminals of the speaker leads are covered with insulating tape
properly, then reset the unit. If “PROTECT” does not disappear, consult your nearest
service center.
Sound cannot be heard.
The unit does not turn on.
Information shown on the display
is incorrect.
The connectors are dirty. Clean the connectors. (page 3)
The unit does not work at all.
Reset the unit.
Radio reception is poor. / Static noise
while listening to the radio.
Connect the antenna firmly. / Pull the antenna out all the way.
“IN” flashes.
The CD player is not operating properly. Reinsert the disc properly. If the condition did
not improve, turn off the unit and consult your nearest service center.
CD-R/CD-RW cannot be played back
and tracks cannot be skipped.
Insert a finalized CD-R/CD-RW (finalize with the component which you used for
recording). (This unit does not support MP3/WMA audio file.)
Disc sound is sometimes interrupted. Stop playback while driving on rough roads. / Change the disc. / Check the cords and
connections.
“NO DISC” appears.
Insert a playable disc into the loading slot.
“TOC ERROR” appears.
The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another
disc instead.
“ERROR 99” appears.
The unit is malfunctioning for some reason. Press the reset button on the unit. If the
“ERROR 99” code does not disappear, consult your nearest service center.
Noise is generated.
Skip to another track or change the disc.
“READING” keeps flashing.
Longer readout time is required.
Elapsed playing time is not correct.
This is caused by how the tracks are recorded.
EN02-13_KDC-153[M]f.indd 10
EN02-13_KDC-153[M]f.indd 10
6/1/11 3:55:43 PM
6/1/11 3:55:43 PM
