background image

— 5 —

About CDs

Handling CDs

• Don’t touch the recording surface of the CD.

• CD-R and CD-RW are easier to damage than

a normal music CD. Use a CD-R or a CD-RW
after reading the caution items on the
package etc.

• Don’t stick tape etc. on the CD.

Also, don’t use a CD with tape stuck on it.

When using a new CD

If the CD center hole or outside rim has burrs,
use it after removing them with a ball pen etc.

CD accessories

Don’t use disc type accessories.

CD cleaning

Clean from the center of the disc and move
outward.

Removing CDs

When removing CDs from this unit pull them
out horizontally.

CDs that can’t be used

• CDs that aren’t round can’t be used.

• CDs with coloring on the recording surface

or that are dirty can’t be used.

• This unit can only play the CDs with

.

It may not correctly play discs which do not
have the mark.

• A CD-R or CD-RW that hasn’t been finalized

can’t be played. (For the finalization process
refer to your CD-R/CD-RW writing software,
and your CD-R/CD-RW recorder instruction
manual.)

CD storage

• Don’t place them in direct sunlight (On the

seat or dashboard etc.) and where the
temperature is high.

• Store CDs in their cases.

Burrs

Burrs

KDC-3026_2026_226_126_U.S  2003.09.22  09:49 AM  Page 5

Summary of Contents for KDC-126





















Reviews: