— 5 —
Putting the channel in the memory.
1
Select the preset band
Press the [
u
] button.
2
Select the channel to put in the memory
Press the [
4
] or [
¢
] button.
3
Put the channel in the memory
Press the [#1] — [#6] button for at least 2 seconds.
The preset number display blinks.
On each band, 1 channel can be put in the memory on each [#1]
— [#6] button.
Only the channel number is stored. Category information is not
stored.
Channel Preset Memory
Calling up the channels in the memory.
1
Select the preset band
Press the [
u
] button.
2
Call up the channel
Press the [#1] — [#6] button.
Preset Tuning
A channel is searched within the selected category.
1
Enter Channel Search mode
Press the [SRCH] button.
2
Select the Category
Press the [
u
] or [
d
] button.
3
Select the Channel
Press the [
4
] or [
¢
] button.
Canceling Channel Search
Press the [SRCH] button.
You cannot operate this unit until all the Category information is
acquired.
Channel Search
Scanning for the channel you want to listen to.
1
Start Channel Scan
Press the [SEEK] button for at least 1 second.
"SCAN" indicator is ON.
2
Release it when the channel you want to listen to is received
Press the [SEEK] button for at least 1 second.
Channel Scan
Press the [
u
] button.
Each time the button is pressed the preset band switches
between the SR1,SR2,SR3, and SR4.
Selecting the Preset Band
KCA-CM50_U.S 03.9.2 11:20 AM Page 5
