Kenwood K-701 Instruction Manual Download

Page: 41 / 48

ENGLISH

Timer operation

Put the unit in standby mode.

Press the

(POWER) key.

When the unit enters the Standby mode, the

STANDBY/TIMER

indicator lights in green.

If there is a power failure or the AC power cord is

unplugged after the timer reservation has been

activated, the

STANDBY/TIMER

indicator blinks in

green. In this case, the clock setting should be

restarted from the beginning.

Active timer program can be seen on the display by

pressing the

(STOP)

key.

Deactivating and activating the timer program

Once the timer setting procedure has been performed, the timer program can be deactivated or activated easily.

When the unit is in on, press the TIMER key.

TIMER

Each press of the TIMER key changes the items ;

Activate

PROG.1

timer.

Activate

PROG.2

timer.

1, 2

Activate both

PROG.1

and

PROG.2

timer.

Deactivate the timer. (Timer indicator is off.)

The timer program contents remain even if the timer is

deactivated.

After a power failure or the AC power cord has been

unplugged, the

STANDBY/TIMER

indicator blinks in

green. In this case, set the present time, and then go

through the timer setting procedure again.

*5506/37-43/EN

04.12.16, 0:23 PM

Summary of Contents for K-701

















































Search results

Summary of Contents for K-701

Reviews:

Related manuals for K-701

Brands by name

Popular brands

Kenwood K-701, Instruction Manual

Search results

Summary of Contents for K-701

Reviews:

Related manuals for K-701

Brands by name

Popular brands