key while turning the transceiver power ON (for 1 second).
Press the
or key to select “ ”.
Press the
MENU
key then press
or
to select “
”
(3 minutes) or “
” (10 minutes).
Press the
MENU
key to exit the selection.
Press the
PTT
,
MON
, or
CAL
key to exit Setting Mode.
This transceiver is also equipped with a pre-alert tone which
sounds 10 seconds before the Time-out Timer expires.
This will allow you time to finish your message before the
transceiver automatically stops transmitting.
B
Attery
S
Aver
This transceiver has been designed to give you the most out of
your battery power. The battery saver function decreases the
amount of power used when a signal is not being received and
no operations are being performed.
While using the transceiver, battery saver will automatically
switch ON after 5 seconds have elapsed with no operations or
received calls. Operating the transceiver or receiving a call will
switch this feature OFF until 5 seconds of non-operation occurs
again.
To turn this function on or off:
With the transceiver power OFF, press and hold the
MENU
key while turning the transceiver power ON (for 1 second).
Press the
or key to select “ ”.
