Various CD playback features
28
EN
ENGLISH
Select "PGM" mode.
Select track numbers in the order you want to play them.
Start playback.
Select the CD input. Carry out this operation while the unit is stopped.
÷
Up to 32 tracks can be programed. When "PGM FULL"
is displayed, no more tracks can be programed.
÷
When a track No. is entered, the track will be added to
the end of the existing program.
÷
When the total time of CD program is 1,000 minutes
or more, the time display shows "- - : - -".
÷
If the wrong track No. is selected in step
1
, press the
STOP
key and reselect a track.
To edit the program after step
2
, do so as explained in
“To clear a programed track”.
ª
1
Select the track.
2
Confirm the selection.
(Go to step
2
within 20 seconds.)
Various CD playback features
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Operation is performed from the remote control unit.
1
2
3
÷
Tracks will be played in the order they were pro-
gramed (following the program numbers).
÷
When the
4
key is pressed once during playback,
the track being played will be played from the
begining.
To skip further to a track preceeding the current track,
press the
4
key twice repeatedly.
÷
When the
¢
key is pressed during playback, play will
skip to the next track in the program.
Listening to the desired sequence
(program playback)
Press the P.MODE key.
Sequence for pressing numeric keys
To select track No. 12 : +10, 2
To select track No. 40 : +10, +10, +10, +10, 0
÷
Tracks can be selected using the
4
and
¢
keys.
Program sequence number
Selection of tracks
“PGM” lights
(To select more than one track, repeat steps
1
and
2
for each track.)
5MD3MD/27-31/EN
9/5/03, 2:05 PM
28
