Kenwood HM-537MP, Instruction Manual

Page: 10 / 20

10
EN
To search a desired file by file name
1
Press FILE SEARCH button on the remote
control.
2
Press the digit buttons to enter the first char-
acter of the file name you wish to search and
press
ENTER button.
Repeat this procedure to enter the rest of the
file name.
3
Press FILE SEARCH button on the remote
control.
4
Press
6
button to start playback.
Programming tracks
Programming tracks of a disc is possible when
playback is stopped. Up to 60 tracks can be stored
in the memory in any order.
1
In stop mode, press program button on the
unit ( PROGRAM button on the remote control)
to enter program setting.
The icon “PROGRAM” and “– – P–01” will
appear on the display. “– –” indicates track
number of the CD and “P–01” indicates pro-
gram number.
2
Press
4
or
¢
button (
4
or
¢
SEARCH/
TUNING button on the remote control) to se-
lect the desired track.
The digit buttons (0~9) on the remote control
can also be used to select tracks.
The icon “PROGRAM” and program number
will start flashing.
3
Press program button on the unit ( PROGRAM
button on the remote control) to store the se-
lected track.
The track number returns to “– –” and the next
program number will appear on the display.
4
Repeat steps
2
to
3
to select and store other
desired tracks in this way.
The icon “PROGRAM” will appear on the dis-
play and “FULL” will start flashing if you attempt
to program more than 60 tracks.
Press program button on the unit ( PROGRAM
button on the remote control) in stop mode to
review the program sequence.
5
Press
6
button to play the programmed
tracks.
If you press REPEAT button on the remote
control during programmed playback, the cur-
rent track or all programmed tracks will be
played repeatedly.
The icon “REPEAT” or “REPEAT ALL” and the
icon “PROGRAM” will appear on the display.
6
Press
7
stop button once to stop program play-
back or twice to clear the program.
The icon “PROGRAM” will disappear from the
display.
Programming tracks
(For MP3-CD only)
Programming tracks of a disc is possible when
playback is stopped. Up to 60 tracks can be stored
in the memory in any order.
1
In stop mode, press program button on the
unit ( PROGRAM button on the remote control)
to enter program setting.
The icon “PROGRAM” and “– – – P–01” will
appear on the display. “– – –” indicates track
number of the MP3-CD and “P–01” indicates
program number.
2
Press p.call/album up or down button to se-
lect the desired album and press
4
or
¢
button (
4
or
¢
SEARCH/TUNING button
on the remote control) to select the desired
track.
The digit buttons (0~9) on the remote control
can also be used to select tracks.
The icon “PROGRAM” and program number
will start flashing.
Using the CD/MP3-CD
*5469/08-20/EN 04.6.1, 11:20 AM 10