3
choosing a speed for all functions
Tool/Attachment
Function
Speed
Maximum Capacities
Knife Blade
One Stage Cake Mix
1 – 8
2Kg/4lb 8oz total weight
Rubbing fat into flour
3 – 8
500g/1lb 2oz flour weight
Adding water to combine pastry ingredients
3 – 8
Chopping/pureeing/pâtés
8
1Kg/2lb 4oz chopping lean meat total weight
Knife Blade with maxi-blend canopy
Soups – start at a low speed and move up to Max
1 – 8
2 litres/3
1
⁄
2
pts
Whisk
Egg Whites
auto
2 – 8
Cream
250-750 mls
Dough tool
Yeasted mixes
6 – 8
1.3Kg/2lb 12oz total weight
650g/1lb 8oz flour weight
Discs – slicing/shredding
Firm food items such as carrots, hard cheese.
5 – 8
–
Softer items such as cucumbers, tomatoes
1 – 3
–
Rasping disc
Parmesan cheese, Potatoes for German
8
–
potato dumplings
Mini Bowl & knife
All processing
8
300g/12oz lean meat total weight
Citrus Press
Smaller fruits i.e. limes and lemons
1
–
Larger fruits i.e. oranges and grapefruits
2
–
Centrifugal juicer
Juicing firm fruit and vegetables ie apples and carrots
auto
1Kg/2lb 4oz apples
800g/1lb 12oz carrots
Juicing soft fruits ie grapes and tomatoes
500g/1lb 2oz
Liquidiser
Soups and drinks
8
1.5 litres/2pts 12fl.oz
Mayonnaise
8
3 eggs + 450 ml oil
Frothing milk
8
1 litre/1
1
⁄
2
pt
Ice crushing - operate the pulse in short bursts
pulse
6 cubes
until crushed to the desired consistency
Multi-mill
Processing a range of spices
8
100g/4oz
Grinding coffee beans
8
75g/3oz
Chopping nuts
8
140g/5oz
to use your food processor
1 Fit the detachable drive shaft onto the power unit
– push down lightly to
ensure the drive shaft is fully engaged.
2
Then
fit the bowl with the handle to the right hand side of the power unit.
Place the handle towards the back and turn clockwise until it locks
.
3 Fit an attachment over the drive shaft.
●
Always fit the bowl and attachment onto the processor before adding
ingredients.
4 Fit the lid
- ensuring the top of the drive shaft locates into the centre of the
lid.
5 Fit the pushers to the feed tube – turn the small pusher clockwise to lock in
position
.
●
The processor will not operate if the bowl, lid or wide feed tube
pusher are not fitted correctly into the interlocks. Check that
the feed tube and bowl handle are situated to the right hand
side.
6 Plug in. The Power On light will come on and flash until the bowl and lid are
fitted correctly. Select one of the following options: -
Auto Button – the light will come on when the Auto Button is pressed and the
optimum speed for the attachment will be automatically selected.
Speed Control – manually select the required speed (Refer to the
recommended speed chart).
Pulse – use the pulse (P) for short bursts. The pulse will operate for as long as
the control is held in position.
7 At the end of processing turn the speed control to the 0 position or if using
the Auto press the button and the light will go out.
●
The Power On light will flash if either the lid, bowl or wide feed
tube are not fitted.
●
The Power On and Auto lights will flash if the Auto is selected
but the interlocks are not engaged.
●
Do not use the lid to operate the processor, always use the
on/off control.
●
The Auto button will not operate if a speed is selected on the
speed control.
●
Always switch off and unplug before removing the lid.
8 Reverse the above procedure to remove the lid, attachments and bowl.
important
●
Your processor bowl is not suitable for crushing or grinding coffee beans, or
converting granulated sugar to caster sugar.
●
When adding almond essence or flavouring to mixtures avoid contact with the
plastic as this may result in permanent marking.