BASIC OPERATIONS
S
wiTching
p
ower
on/ oFF
Press the
switch to switch the transceiver ON.
• A beep sounds and the display momentarily lights up.
• If the Transceiver Password function is programmed, “PASSWORD” appears on the
display. You must enter the password to unlock the transceiver. Refer to “Transceiver
Password”, below.
Press and hold the
switch for approximately second to switch the transceiver
OFF.
■
Transceiver Password
To enter the password:
1
Rotate the
CH
control to select a digit.
2
Press the
GRP
key to accept the entered digit and move to the next
digit.
3
Repeat steps and to enter the entire password.
• The password can contain a maximum of 6 digits.
• Press the
PF 3
key to delete an incorrectly entered character. Press and hold
the
PF 3
key to delete all characters.
4
Press the
PF 2
key to confirm the password.
• If you enter an incorrect password, an error tone sounds and the transceiver
remains locked.
To enter the password using a DTMF keypad:
1
Press the DTMF keys corresponding to the password digits.
• The password can contain a maximum of 6 digits.
• Press the
PF 3
or DTMF
#
key to delete an incorrectly entered character. Press
and hold the
PF 3
or DTMF
#
key to delete all characters.
2
Press the
PF 2
or DTMF
key to confirm the password.
• If you enter an incorrect password, an error tone sounds and the transceiver
remains locked.
A
djuSTing
The
v
olume
Rotate the
VOL
control clockwise to increase the volume and counterclockwise to
decrease the volume.
