
DV-5700/DVF-R9050/R9050-S
24
MECHANISM DESCRIPTION
1-7 Disassembling the Traverse gear A.
1. Remove the traverse gear A.
1-8 Optical Pickup Tilt Adjustment
TRAVERSE
GEAR A
11
STEP1
Turn the power on with
pressing the "DISC 1" key.
STEP2
(Display shows "INSPECTION " , test mode.)
Press "OPEN/CLOSE " key.
STEP3
Load DVD disc and play 1st chapter.
Press "SKIP UP/DOWN " keys
(Inner periphery)
for Tno. up or down.
STEP4
Press "PLAY " key.
Check to see that "JITTER XXX % " is displayed.
(Present jitter value.)
STEP5
Adjust to the minimum jitter value.
Do steps 5~7 from the bottom of
(Tangential adjustment screw)
the main unit using a hex wrench.
STEP6
Play DVD disc last chapter. (Outer periphery)
(Tilt adjustment screw1)
Adjust to the minimum jitter value.
STEP7
Repeat adjusting tilt
adjustment screws
1 and 2 alternately,
Play DVD disc last chapter. (Outer periphery)
two or three times.
(Tilt adjustment screw2)
Adjust to the minimum jitter value.
Play the disc to make sure there is no picture
degradation in the inner, middle and outer
peripheries, and no audio skipping.
STEP11
STEP12
Start
Check condition
after adjustment
Pull out the traverse unit.
(Refer to disassembly procedure
in this manual.
Lock the adjustment screw in
position using screw lock.
Assemble the main unit.
Follow procedure for handling after
repairs are completed.
End
Fig. 9
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299