18
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
BLUETOOTH®
Make a call
You can make a call from the call history, phonebook, or dialing the number. Call by
voice is also possible if your mobile phone has the feature.
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following table), then press the
knob.
3
Repeat step
2
until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
.
CALL HISTORY
(Applicable only if the phone supports PBAP)
1
Press the volume knob to select a name or a phone number.
• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the display to
indicate the previous call status.
•
Press
DISP
to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
2
Press the volume knob to call.
PHONE BOOK
(Applicable only if the phone supports PBAP)
1
Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains
many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
*
), press
J
/
K
.
• To select the desired first letter, turn the volume knob or press
S
/
T
, then press
the knob.
Select “1” to search with numbers and select “
*
” to search with symbols.
2
Turn the volume knob to select a name, then press the knob.
3
Turn the volume knob to select a phone number, then press the knob to call.
•
The phonebook of the connected phone is automatically transferred to the unit when
pairing.
•
Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL
•
This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as “U”.)
NUMBER DIAL
1
Turn the volume knob to select a number (0 to 9)
or character ( , #, +).
2
Press
S
/
T
to move the entry position.
Repeat steps
1
and
2
until you finish entering the
phone number.
3
Press the volume knob to call.
(or using RC-406)
1
Press the number buttons (
0
to
9
) to enter the
phone number.
2
Press
to call.
VOICE
Speak the name of the contact you want to call or the
voice command to control the phone functions.
(
Make a call using voice recognition
)
BATT LOW
/
MID
/
FULL
*
: Shows the strength of the battery.
NO SIGNAL
/
LOW
/
MID
/
MAX
*
: Shows the strength of the current
received signal.
*
Functionality depends on the type of the phone used.
Make a call using voice recognition
1
Press
to activate the voice recognition of the
connected phone.
2
Speak the name of the contact you want to call or
the voice command to control the phone functions.
• Supported Voice Recognition features vary for each
phone. Refer to the instruction manual of the connected
phone for details.
• This unit also supports the intelligent personal assistant
function of iPhone.
JS_KWD_DPX792BH_KN_EN_00_1.indd 18
JS_KWD_DPX792BH_KN_EN_00_1.indd 18
28/10/2015 5:24:16 PM
28/10/2015 5:24:16 PM
